69-8624-32 Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M45 x 2 MALC-8HSSTEELFKM
기능
- Simultaneously connect multiple pipes in one connection operation. Supports high-pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 8 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
사양
- Socket
- MALC-1~8HS Type (High Pressure Screw Fixing Type)
- Mass (g): 579
- Dimension (L1) (mm): (86)
- Dimension (L2) (mm): (53)
- Dimension (L3) (mm): 18
- Dimension (φD) (mm): 54
- Dimensions (H) (mm): Hex 50
- Dimensions (T) (mm): M45 x 2
- Maximum Working Pressure: 21.0 MPa{214kgf/cm2} (Single Unit/8.0 MPa{81kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluid: hydraulic fluid
- Body Material: Special Steel (Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 31.5 MPa{321kgf/cm2} (Single Unit/12.0 MPa{122kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 95 N · m{969kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 347 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.85 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.85 mL * Varies according to operating conditions
- Maximum connection holding force: 64500 N{6577kgf}
- Minimum Connection Holding Force Calculated *: P×1360+310 N{p×13.6+31kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
| 주문 번호 | 69-8624-32 | |
|---|---|---|
| 모델 번호 | MALC-8HSSTEELFKM | |
| JAN 코드 | 4992338475420 | |
| 표준 가격 |
JPY: 56,000
USD: 348.43
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8624-27 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M16 x 1 MALC-1HSSTEELFKM | MALC-1HSSTEELFKM | 1piece | JPY: 21,500 | USD: 133.77 |
|
|
 |
69-8624-28 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M20 x 1.5 MALC-2HSSTEELFKM | MALC-2HSSTEELFKM | 1piece | JPY: 23,900 | USD: 148.71 |
|
|
 |
69-8624-29 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M24 x 1.5 MALC-3HSSTEELFKM | MALC-3HSSTEELFKM | 1piece | JPY: 29,200 | USD: 181.68 |
|
|
 |
69-8624-30 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M35 x 1.5 MALC-4HSSTEELFKM | MALC-4HSSTEELFKM | 1piece | JPY: 35,800 | USD: 222.75 |
|
|
 |
69-8624-31 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M40 x 2 MALC-6HSSTEELFKM | MALC-6HSSTEELFKM | 1piece | JPY: 44,900 | USD: 279.37 |
|
|
 |
69-8624-32 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Male Screw M45 x 2 MALC-8HSSTEELFKM | MALC-8HSSTEELFKM | 1piece | JPY: 56,000 | USD: 348.43 |
|