사양

• Socket
• MALC-8S-FL Model (Flange Fixed Type for Medium Pressure)
• Mass (g): 978
• Dimension (L1) (mm): (86)
• Dimension (L2) (mm): (53)
• Dimension (L3) (mm): 18
• Dimension (L4) (mm): 12
• Dimensions (□S) (mm): 79
• Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
• Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
• Applicable fluids: water, hydraulic fluid, air
• Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
• Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
• Seal Material: Fluororubber (FKM)
• Operating temperature range *: -20 to +180°C
• *The available temperature range depends on the operating conditions.
• Recommended maximum tightening torque: 23 N · m{235kgf · cm}
• Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
• Minimum cross-sectional area: 347 mm2
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
• Amount of air mixed at the time of connection: 0.85 mL * Varies depending on operating conditions
• Amount of liquid dripping at the time of separation: 0.85 mL * Varies according to operating conditions
• Maximum connection holding force: 15600 N{1591kgf}
• Minimum Connection Holding Force Calculated *: P×1360+310 N{p×13.6+31kgf}
• *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
•