69-8623-99 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M35 x 1.5 MALC-4SSUSFKM
기능
- Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 2 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
사양
- Socket
- MALC-1~12 S Model (Medium Pressure Screw Fixing Type)
- Mass (g): 306
- Dimension (L1) (mm): (64)
- Dimension (L2) (mm): (36.5)
- Dimension (L3) (mm): 17
- Dimension (φD) (mm): 45
- Dimensions (H) (mm): Hex 41
- Dimensions (T) (mm): M35 x 1.5
- Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluids: water, hydraulic fluid, air
- Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 45 N · m{460kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 153 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.55 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.55 mL * Varies according to operating conditions
- Maximum connection holding force: 10,000 N{1019kgf}
- Minimum Connection Holding Force Calculated *: P×855+260 N{p×8.55+26kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
| 주문 번호 | 69-8623-99 | |
|---|---|---|
| 모델 번호 | MALC-4SSUSFKM | |
| JAN 코드 | 4992338116484 | |
| 표준 가격 |
JPY: 36,200
USD: 226.92
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8623-96 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M16 x 1 MALC-1SSUSFKM | MALC-1SSUSFKM | 1piece | JPY: 21,500 | USD: 134.77 |
|
|
 |
69-8623-97 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M20 x 1.5 MALC-2SSUSFKM | MALC-2SSUSFKM | 1piece | JPY: 23,900 | USD: 149.82 |
|
|
 |
69-8623-98 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M24 x 1.5 MALC-3SSUSFKM | MALC-3SSUSFKM | 1piece | JPY: 29,200 | USD: 183.04 |
|
|
 |
69-8623-99 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M35 x 1.5 MALC-4SSUSFKM | MALC-4SSUSFKM | 1piece | JPY: 36,200 | USD: 226.92 |
|
|
 |
69-8624-01 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M40 x 2 MALC-6SSUSFKM | MALC-6SSUSFKM | 1piece | JPY: 44,900 | USD: 281.45 |
|
|
 |
69-8624-02 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M45 x 2 MALC-8SSUSFKM | MALC-8SSUSFKM | 1piece | JPY: 56,000 | USD: 351.03 |
|
|
 |
69-8624-03 | Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M60 x 2 MALC-12SSUSFKM | MALC-12SSUSFKM | 1piece | JPY: 139,300 | USD: 873.19 |
|