69-8218-07 Mold Temperature Adjustment Joint Straight 10 inch Tube 10 mm Screw R1/4 AKC10-1002
기능
- The connection part (plug) and the screw part (socket) are separated. It can be connected simply by machining the mold in advance according to the screw size, embedding the screw part using a hex wrench, and inserting the connection part afterwards. In addition, when attaching and detaching, the opening sleeve is removed by removing the joint, so that no protrusion remains on the mold.
- The built-in stop valve type allows for safe attachment and detachment of the joint. (Does not spill hot water when attaching/detaching joints.)
사양
- Applicable Tube Outer Diameter (mm): 10
- Connection Diameter: R1/4
- Hex Opposite Side (mm): 8
- Total length (mm): 53.5
- Fluids used: air, water (conditions apply), heating medium oil
- Applicable Tube Outer Diameter D (mm): 10
- Operating temperature range (°C): 0~60 (air), 0~99 (water), 0~120 (heating medium oil) (not frozen)
- Operating temperature range: 0~60°C (air), 0~99°C (water), 0~120°C (heating medium oil) (not frozen)
- Maximum working pressure: 0.9 MPa
- Material/Finish: Body/Brass + Electroless Nickel Plating, Seal Rubber/Hydrogenated Nitrile Rubber (HNBR)
- When the fluid used is water or heat medium oil, observe the following conditions. 1. When using water or heating medium oil, be sure to keep the surge pressure below the maximum working pressure. 2.Be sure to use the insert ring when using water or heating medium oil.
- Country of Origin: Japan
- Securities Code: 378-0791
패키지 크기：77×45×19 mm 60 g [패키지 크기 정보]
| 주문 번호 | 69-8218-07 | |
|---|---|---|
| 모델 번호 | AKC10-1002 | |
| 표준 가격 |
JPY: 1,380
USD: 8.66
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8217-82 | Mold Temperature Adjustment Joint Straight 08 Type Tube 8MM Screw R1/8 AKC08-801 | AKC08-801 | 1piece | JPY: 1,240 | USD: 7.78 |
|
|
 |
69-8217-83 | Mold Temperature Adjustment Joint Straight 08 Type Tube 8MM Screw R1/4 AKC08-802 | AKC08-802 | 1piece | JPY: 1,260 | USD: 7.90 |
|
|
 |
69-8218-07 | Mold Temperature Adjustment Joint Straight 10 inch Tube 10 mm Screw R1/4 AKC10-1002 | AKC10-1002 | 1piece | JPY: 1,380 | USD: 8.66 |
|