69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS
기능기능 class="init">
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Mitsuboshi Belting Ltd.
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS
特徴
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
사양
- Shape: R2
- Type: Type 2
- Shaft Hole Diameter (mm): 75
- Key Dimensions (mm): 20 x 12
- L(mm):123.8
- U(mm):15.9
- T(mm):107.9
- D (mm) Large Diameter: 101.6
- D (mm) Small Diameter: 95.25
- H(mm):136.5
- V(mm):117.5
- W(mm):20
- X(mm):101.6
- Y(mm):6.3
- R(mm):6.3
- S(mm):7
- Number of bolts: 3
- Bolt Size: M10 x 40
- Approximate mass (kg): 5
-
주문 번호주문 번호ss="init">
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Mitsuboshi Belting Ltd.
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS
特徴
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
仕様
- Shape: R2
- Type: Type 2
- Shaft Hole Diameter (mm): 75
- Key Dimensions (mm): 20 x 12
- L(mm):123.8
- U(mm):15.9
- T(mm):107.9
- D (mm) Large Diameter: 101.6
- D (mm) Small Diameter: 95.25
- H(mm):136.5
- V(mm):117.5
- W(mm):20
- X(mm):101.6
- Y(mm):6.3
- R(mm):6.3
- S(mm):7
- Number of bolts: 3
- Bolt Size: M10 x 40
- Approximate mass (kg): 5
-
주문 번호
69-5980-33
型番
R2-75N-JIS
標準価格
JPY: 27,460
USD: 172.25
Excange rate 1USD= 159.42JPY
Valid price in Japan
수량
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
수량일본의 주식ass="init">
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
Mitsuboshi Belting Ltd.
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS
特徴
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
仕様
- Shape: R2
- Type: Type 2
- Shaft Hole Diameter (mm): 75
- Key Dimensions (mm): 20 x 12
- L(mm):123.8
- U(mm):15.9
- T(mm):107.9
- D (mm) Large Diameter: 101.6
- D (mm) Small Diameter: 95.25
- H(mm):136.5
- V(mm):117.5
- W(mm):20
- X(mm):101.6
- Y(mm):6.3
- R(mm):6.3
- S(mm):7
- Number of bolts: 3
- Bolt Size: M10 x 40
- Approximate mass (kg): 5
-
アズワン品番
69-5980-33
型番
R2-75N-JIS
標準価格
JPY: 27,460
USD: 172.25
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
공급자 재고
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS
特徴
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
사양
- Shape: R2
- Type: Type 2
- Shaft Hole Diameter (mm): 75
- Key Dimensions (mm): 20 x 12
- L(mm):123.8
- U(mm):15.9
- T(mm):107.9
- D (mm) Large Diameter: 101.6
- D (mm) Small Diameter: 95.25
- H(mm):136.5
- V(mm):117.5
- W(mm):20
- X(mm):101.6
- Y(mm):6.3
- R(mm):6.3
- S(mm):7
- Number of bolts: 3
- Bolt Size: M10 x 40
- Approximate mass (kg): 5
주문 번호주문 번호ss="init">
69-5980-33 Bushing Shape for Mitsuboshi Belt Maxter Wedge Pulley R2 Type Type 2 R2-75N-JIS特徴
仕様
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|