기능

• Maximum temperature 530°C, 550 W high power static solder bath
• A lineup of three durable tanks
• Features designed for safety and convenience
• Heater output is greatly increased!
• High-power heater achieves quick start-up and maximum temperature of 530°C
• Equipped with 550 W high-power heater
• Compared with the conventional product FX-301B (200 W), the time required for solder to melt in the tank is reduced by approximately 60%. Prevents tank temperature drop due to continuous work.
• Maximum temperature 530°C
• It can shorten soaking time in high temperature zone such as peeling work of coil enamel coating.
• Only 50 Square Bath Can Be Set Up to 530°C
• 3 sizes of tanks with excellent durability
• Line-up of special coating tanks with excellent durability.
• The body is equipped with a standard 75 square tank that can be used for a wide range of work.
• It can be replaced with the optional 50 square tank or 100 square tank according to the work.
• Safe and secure work environment
• solder tank cover
• Solder tank cover prevents scattering of solder during solder melting
• STOP mode
• The temperature in the solder bath is displayed even when the heater is turned off, and the temperature drop in the bath can be confirmed.
• Fixing bracket (optional)
• Safety design that allows the main body to be fixed to the workbench * Separate fixing screws are required.
• Functions designed for convenience
• Display multiple information on LCD
• Multiple information such as set temperature and tank sensor temperature are displayed simultaneously using icons on a large display.
• Parameter setting (setting the solder composition to be used)
• By setting the composition of the solder, rapid solder melting is possible.
• Auto Offset/Auto Calibration
• By using a thermometer (FG-100B/FG-101B) and transmitting temperature measurement results via infrared, automatic correction/calibration is possible.
• Software
• By connecting the unit to a PC, you can check and change various settings such as temperature using software. In addition, the correction/calibration history is recorded on the PC, enabling zero human error management.
• Other Useful Functions
• timer function
• The timer function allows you to count the cumulative usage time of the tank. Use this as a guide for when to replace the tank.
• *The service life (tank replacement time) depends on the usage.
• solder leakage detection function
• If solder leaks from the tank, it detects solder and notifies you with an error.
• easy heater replacement
• The upper part of the body opens wide, so you can easily change the heater.
• *After replacing the heater, measure the temperature of the solder bath. If there is a temperature difference from the set temperature, correct the temperature.
• Lead-free recommended: This product is also recommended for work using lead-free solder.
• RoHS Compliant (as of July 2024): This product complies with the regulation values of 10 substances prohibited by the European RoHS Directive.