사양

• Caulking Plate Thickness (mm): 1.0~3.2
• Pilot Hole Diameter (mm): 9.1
• Applicable Screw: M6 x 1.0
• Nut Outer Diameter (mm): 10.0
• Total length (mm): 14.6
• Flange thickness (mm): 0.5
• Pack Quantity (Pieces): 6
• specifications: small flange
• Material: Aluminum (A5056)
• Torque Strength (N · m): 4.9
• Thread Tamping Strength (kN): 4.0
• For use, a 10 mm opposite-side glass wrench and a 5 mm opposite-side hexagonal wrench are required.
• Before using the product, please read all of the "Instruction Manual" attached to the product carefully, and use the product properly after fully understanding it.
• Do not over-tighten. It may damage the thread part of the shrimp nut.
• Use within the proper crimping plate thickness of shrimp nut. If the proper crimping plate thickness is exceeded, the performance will not be satisfactory.
• Specifications are subject to change without notice.
• Dimensions are nominal values, so there may be slight variations. << Set Contents >>
• Nutter Body for M6 x 1
• Mandrel x 1
• Hex Nut x 2
• Aluminum Shrimp Nut (NAK6M) x 6
•