사양

• Target gas: Oxygen
• Detection principle: Diaphragm galvanic battery type
• Intensity display: LCD digital display (3 digits, 7 segments/orange, 2 colors of red) * No backlight at normal time
• Detection range (vol%): 0-25
• Display resolution (vol%): 0.1
• Detection method: Diffusion type
• Alarm setting: 1st/19vol% (L), 2nd/18vol% (LL)
• [Standard setting]
• Indication accuracy (under the same conditions): within ±0.7vol%
• Response time (same conditions): 90% response within 30 seconds
• Alarm delay time (under the same conditions): Within 5 seconds after 10~11vol% gas is detected on the oxygen shortage alarm (18vol%L alarm).
• Accuracy of alarm setting: the difference between the alarm setting and the concentration indicated at the time of alarm shall be zero.
• Gas alarm type: two-stage alarm (L-LL)
• Gas alarm display: 1st/Density indication and backlight on (orange), buzzer, 2nd/Density indication and backlight on (red), buzzer
• Gas alarm operation: self-holding
• Gas Alarm Contact: Non-Voltage Contact 1a, Normally Non-Excited (Excitation at Alarm)
• Failure alarm and self-diagnosis: System error/sensor connection error
• Failure Warning Display: Contents Display and Backlight Flashing (Red), Buzzer
• Failure alarm operation: automatic return
• Contact Capacity: None
• Transmission Specifications: DC0-1 V (Non-Insulated)
• Power supply: AA batteries x 2
• Battery Type Continuous Operation: Approximately 1 year (25°C, without alarm, without illumination, with AA alkaline batteries)
• Operating temperature range: -10~40°C (no sudden change)
• Operating humidity range: 90%RH or less (no condensation)
• Operating pressure range: atmospheric pressure (80 kPa to 105 kPa)
• Structure: Wall mounted type/sensor integrated type
• External Dimensions (mm): Approx. 80 (W) x 120 (H) x 35.5 (D)
• Mass (g): about 230
•