Junkosha Inc.

67-2262-13　One Touch Joint M Series Reducer 10 mm-6mm　PRM-10-6-PM

기능

Electroless nickel plating is applied to the metal part.
The R (PT) screws are coated with a color sticker for each R (PT) screw that can tell the screw size at a glance.
The body can be positioned according to the tube extraction direction.
The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
In addition, it is possible to tighten the screw while fixing the resin part.
The tube grip rotates smoothly within the fitting and prevents the tube from turning out.
For General Pneumatic and Hydraulic Piping
for robots and labor-saving equipment

Applicable Tube Outer Diameter D1 (mm): 6
Operating Temperature Range (°C): Air: 0~60°C, Water: 0~30°C(Do not freeze.)
Fluids used: Air, Water
Hex Opposite Side (mm): 14
Compatible joint size D2 (mm): 10
Fluids used: Air, Water
Fluid Temperature: Air: 0~60°C, Water: 0~30°C(Do not freeze.)
Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
Working vacuum pressure (when the working fluid is air): 1.4 kPa or more
Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
Material/Finish: Body (Resin)/Polybutylene Terephthalate (PBT)
Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less.
Note:When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
Country of Origin: Japan
Securities Code: 383-8354

패키지 크기：47×14×14 mm　　 [패키지 크기 정보]

주문 번호	67-2262-13
모델 번호	PRM-10-6-PM
표준 가격	JPY: 229 USD: 1.44 Excange rate 1USD= 159.53JPY Valid price in Japan
수량	1piece
일본의 주식
공급자 재고

주문 번호	이름	모델 번호	수량	표준 가격	일본에서의 유효 가격
67-2261-77	One Touch Joint M Series Reducer 12 mm-10mm　PRM-12-10-PM	PRM-12-10-PM	1piece	JPY: 254	USD: 1.59
67-2261-90	One Touch Joint M Series Reducer 12 mm-8mm　PRM-12-8-PM	PRM-12-8-PM	1piece	JPY: 246	USD: 1.54
67-2262-03	One Touch Joint M Series Reducer 10 mm-8mm　PRM-10-8-PM	PRM-10-8-PM	1piece	JPY: 236	USD: 1.48
67-2262-13	One Touch Joint M Series Reducer 10 mm-6mm　PRM-10-6-PM	PRM-10-6-PM	1piece	JPY: 229	USD: 1.44
67-2262-25	One Touch Joint M-Series Reducer 8 mm-4mm　PRM-8-4-PM	PRM-8-4-PM	1piece	JPY: 218	USD: 1.37
67-2262-36	One Touch Joint M Series Reducer 8 mm-6mm　PRM-8-6-PM	PRM-8-6-PM	1piece	JPY: 218	USD: 1.37
67-2262-44	One Touch Joint M-Series Reducer 6 mm-4mm　PRM-6-4-PM	PRM-6-4-PM	1piece	JPY: 210	USD: 1.32