67-2261-79 One Touch Joint W Series Reducer 12 mm-8mm WR-1208
기능
- All resin parts are UL94V-0 equivalent products.
- Resin parts are all UR (PT) screws. Resin press-fit parts have 30% more strength than conventional products.
- New mechanism tube grip dramatically improves impact resistance.
- The tube grip rotates smoothly within the fitting, preventing tube breakage due to tube rotation.
- All sealing materials, such as O-rings and V-seals, use water-resistant NBR.
- No need for seal tape.
- The R (PT) screw part is sealed.
- The body can be positioned according to the tube extraction direction.
- The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
- For Automotive Spot Welding Equipment For Piping for Air Pressure and Water Pressure
- For Piping Requiring Impact Resistance
- For Flame Retardant Piping
사양
- Applicable Tube Outer Diameter D1 (mm): 8
- Operating Temperature Range (°C): Air: 0~60°C, Water: 0~60°C(Do not freeze.)
- Fluids used: Air, Water
- Compatible joint size D2 (mm): 12
- Fluids used: Air, Water
- Fluid Temperature: 0~60°C (Air), 0~60°C (Water * Cannot be Frozen)
- Maximum working pressure: 0.97 MPa (air), 0.29 MPa (water)
- Working vacuum pressure: 1.4 kPa or more (when the working fluid is air)
- Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
- Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
- Material/Finish: Body (Resin)/Flame Retardant Polybutylene Terephthalate (PBT) (UL94 V-0 Equivalent)
- Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less.
- Note:When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
- Country of Origin: Japan
- Securities Code: 384-0372
패키지 크기：50×15×15 mm [패키지 크기 정보]
| 주문 번호 | 67-2261-79 | |
|---|---|---|
| 모델 번호 | WR-1208 | |
| 표준 가격 |
JPY: 246
USD: 1.53
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-2261-79 | One Touch Joint W Series Reducer 12 mm-8mm WR-1208 | WR-1208 | 1piece | JPY: 246 | USD: 1.53 |
|
|
 |
67-2261-80 | One Touch Joint W Series Reducer 12 mm-10mm WR-1210 | WR-1210 | 1piece | JPY: 254 | USD: 1.58 |
|
|
 |
67-2261-99 | One Touch Joint W Series Reducer 10 mm-6mm WR-1006 | WR-1006 | 1piece | JPY: 229 | USD: 1.43 |
|
|
 |
67-2262-05 | One Touch Joint W Series Reducer 10 mm-8mm WR-1008 | WR-1008 | 1piece | JPY: 236 | USD: 1.47 |
|
|
 |
67-2262-31 | One Touch Joint W Series Reducer 8 mm-6mm WR-0806 | WR-0806 | 1piece | JPY: 218 | USD: 1.36 |
|