Junkosha Inc.

67-2255-87 One Touch Joint W Series Long Elbow 12 mm PT1/2 WLL-12-04

기능

  • All resin parts are UL94V-0 equivalent products.
  • Resin parts are all UR (PT) screws. Resin press-fit parts have 30% more strength than conventional products.
  • New mechanism tube grip dramatically improves impact resistance.
  • The tube grip rotates smoothly within the fitting, preventing tube breakage due to tube rotation.
  • All sealing materials, such as O-rings and V-seals, use water-resistant NBR.
  • No need for seal tape.
  • The R (PT) screw part is sealed.
  • The body can be positioned according to the tube extraction direction.
  • The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
  • For Automotive Spot Welding Equipment For Piping for Air Pressure and Water Pressure
  • For Piping Requiring Impact Resistance
  • For Flame Retardant Piping

사양

  • Applicable Tube Outer Diameter D (mm): 12
  • Connection Diameter: PT1/2
  • Hex Opposite Side (mm): 22
  • Fluids used: Air, Water
  • Fluid temperature (°C): 0~60°C (air), 0~60°C (water * not freezable)
  • Maximum working pressure: 0.97 MPa (air), 0.29 MPa (water)
  • Working vacuum pressure: 1.4 kPa or more (when the working fluid is air)
  • Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
  • Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
  • Material/Finish: Body (Resin)/Flame Retardant Polybutylene Terephthalate (PBT) (UL94 V-0 Equivalent)
  • Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less.
  • When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
  • Country of Origin: Japan
  • Securities Code: 383-9881
  •  

패키지 크기:78×39×22 mm   [패키지 크기 정보]

주문 번호 67-2255-87
모델 번호 WLL-12-04
표준 가격 JPY: 580 USD: 3.64
Excange rate 1USD= 159.53JPY
Valid price in Japan
수량 1piece
일본의 주식
공급자 재고

다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)

제품 이미지 주문 번호 이름 모델 번호 수량 표준 가격 일본에서의 유효 가격 재고
[공급자 재고]
67-2255-87 One Touch Joint W Series Long Elbow 12 mm PT1/2 WLL-12-04 WLL-12-04 1piece JPY: 580 USD: 3.64

67-2256-14 One Touch Joint W Series Long Elbow 10 mm PT1/2 WLL-10-04 WLL-10-04 1piece JPY: 563 USD: 3.53

67-2256-33 One Touch Joint W Series Long Elbow 12 mm PT3/8 WLL-12-03 WLL-12-03 1piece JPY: 526 USD: 3.30

67-2256-50 One Touch Joint W Series Long Elbow 12 mm PT1/4 WLL-12-02 WLL-12-02 1piece JPY: 519 USD: 3.25

67-2256-69 One Touch Joint W Series Long Elbow 12 mm PT1/8 WLL-12-01 WLL-12-01 1piece JPY: 573 USD: 3.59

67-2257-22 One Touch Joint W Series Long Elbow 10 mm PT3/8 WLL-10-03 WLL-10-03 1piece JPY: 500 USD: 3.13

67-2257-32 One Touch Joint W Series Long Elbow 10 mm PT1/8 WLL-10-01 WLL-10-01 1piece JPY: 471 USD: 2.95

67-2257-37 One Touch Joint W Series Long Elbow 10 mm PT1/4 WLL-10-02 WLL-10-02 1piece JPY: 490 USD: 3.07

67-2257-62 One Touch Joint W Series Long Elbow 8 mm PT3/8 WLL-08-03 WLL-08-03 1piece JPY: 446 USD: 2.80

67-2257-89 One Touch Joint W Series Long Elbow 6 mm PT3/8 WLL-06-03 WLL-06-03 1piece JPY: 391 USD: 2.45

67-2258-53 One Touch Joint W Series Long Elbow 8 mm PT1/4 WLL-08-02 WLL-08-02 1piece JPY: 391 USD: 2.45

67-2259-17 One Touch Joint W Series Long Elbow 8 mm PT1/8 WLL-08-01 WLL-08-01 1piece JPY: 381 USD: 2.39

67-2259-23 One Touch Joint W Series Long Elbow 6 mm PT1/4 WLL-06-02 WLL-06-02 1piece JPY: 363 USD: 2.28

67-2260-10 One Touch Joint W Series Long Elbow 6 mm PT1/8 WLL-06-01 WLL-06-01 1piece JPY: 345 USD: 2.16