65-2019-08 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-120-4
特徴
- High rigidity is realized by adopting a tapered neck shape.
- Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
- Uses HARDMAX coat that maintains high levels of heat resistance, toughness, and lubrication.
- 65HRC high hardness material can also be cut.
- Applicable Work Materials: Quenched Steel (~55HRC) (~60HRC) (~65HRC), Pre-Hardened Steel, Copper, Carbon Steel, Alloy Steel, Cast Iron, Titanium Alloy, Super Heat-Resistant Alloy
- Shank Taper Angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
사양
- Ball radius (mm): R1
- Blade length (mm): 1.6
- Total length (mm): 60
- Shank diameter (mm): 4
- Length Under Neck (mm): 12
- Number of blades: 2
- Helix angle: 30
- Surface treatment: HARDMAX
- Surface treatment: HM coating
- Helix angle 30 degrees
- Material/Finish: Ultrafine Grain Alloy (Super MG)
- Mass: 24 g
- Country of origin: Japan
- Securities Code: 250 -4431
| 주문 번호 | 65-2019-08 | |
|---|---|---|
| 모델 번호 | HTNB2020-120-4 | |
| JAN 코드 | 4560295115781 | |
| 표준 가격 |
JPY: 6,581
USD: 41.28
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-2018-70 | Carbide 2-Flute Tapered Neck Ball End Mill, R 0.3 x 8 Neck Length x 2 Neck Taper Angle x 0.48 Blade Length x Total Length 50 HTNB2006-080-4 | HTNB2006-080-4 | 1piece | JPY: 6,923 | USD: 43.43 |
|
|
 |
65-2018-71 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x 8 Neck Length x 3 Neck Taper Angle x 0.48 Blade Length x Total Length 50 HTNB2006-080-6 | HTNB2006-080-6 | 1piece | JPY: 6,923 | USD: 43.43 |
|
|
 |
65-2018-72 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 5 degrees x Blade Length 0.48 x Total Length 50 HTNB2006-120-10 | HTNB2006-120-10 | 1piece | JPY: 7,605 | USD: 47.70 |
|
|
 |
65-2018-73 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 0.48 x Total Length 50 HTNB2006-120-4 | HTNB2006-120-4 | 1piece | JPY: 7,605 | USD: 47.70 |
|
|
 |
65-2018-74 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50 HTNB2006-120-6 | HTNB2006-120-6 | 1piece | JPY: 7,605 | USD: 47.70 |
|
|
 |
65-2018-75 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 14 x Neck Taper Angle 30 "x Blade Length 0.48 x Total Length 50 HTNB2006-140-1 | HTNB2006-140-1 | 1piece | JPY: 7,605 | USD: 47.70 |
|
|
 |
65-2018-76 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 14 x Neck Taper Angle 1 degree 30 "x Blade Length 0.48 x Total Length 50 HTNB2006-140-3 | HTNB2006-140-3 | 1piece | JPY: 7,605 | USD: 47.70 |
|
|
 |
65-2018-77 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 5 degrees x Blade Length 0.48 x Total Length 50 HTNB2006-200-10 | HTNB2006-200-10 | 1piece | JPY: 10,156 | USD: 63.71 |
|
|
 |
65-2018-78 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 1 degree 30 "x Blade Length 0.48 x Total Length 50 HTNB2006-200-3 | HTNB2006-200-3 | 1piece | JPY: 10,156 | USD: 63.71 |
|
|
 |
65-2018-79 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 0.48 x Total Length 50 HTNB2006-200-4 | HTNB2006-200-4 | 1piece | JPY: 10,156 | USD: 63.71 |
|
|
 |
65-2018-80 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50 HTNB2006-200-6 | HTNB2006-200-6 | 1piece | JPY: 10,156 | USD: 63.71 |
|
|
 |
65-2018-81 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 5 degrees x Blade Length 0.8 x Total Length 50 HTNB2010-120-10 | HTNB2010-120-10 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-82 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 50 HTNB2010-120-4 | HTNB2010-120-4 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-83 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 50 HTNB2010-120-6 | HTNB2010-120-6 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-84 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 14 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 50 HTNB2010-140-1 | HTNB2010-140-1 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-85 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 14 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 50 HTNB2010-140-3 | HTNB2010-140-3 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-86 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 50 HTNB2010-160-4 | HTNB2010-160-4 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-87 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 16 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 50 HTNB2010-160-6 | HTNB2010-160-6 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-88 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 18 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 50 HTNB2010-180-1 | HTNB2010-180-1 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-89 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 18 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 50 HTNB2010-180-3 | HTNB2010-180-3 | 1piece | JPY: 6,143 | USD: 38.53 |
|
|
 |
65-2018-90 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 5 degrees x Blade Length 0.8 x Total Length 70 HTNB2010-200-10 | HTNB2010-200-10 | 1piece | JPY: 7,800 | USD: 48.93 |
|
|
 |
65-2018-91 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 60 HTNB2010-200-4 | HTNB2010-200-4 | 1piece | JPY: 7,800 | USD: 48.93 |
|
|
 |
65-2018-92 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 60 HTNB2010-200-6 | HTNB2010-200-6 | 1piece | JPY: 7,800 | USD: 48.93 |
|
|
 |
65-2018-93 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 29.8 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 70 HTNB2010-298-6 | HTNB2010-298-6 | 1piece | JPY: 8,580 | USD: 53.82 |
|
|
 |
65-2018-94 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 70 HTNB2010-300-1 | HTNB2010-300-1 | 1piece | JPY: 8,580 | USD: 53.82 |
|
|
 |
65-2018-95 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 1 degree x Blade Length 0.8 x Total Length 70 HTNB2010-300-2 | HTNB2010-300-2 | 1piece | JPY: 8,580 | USD: 53.82 |
|
|
 |
65-2018-96 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 70 HTNB2010-300-3 | HTNB2010-300-3 | 1piece | JPY: 8,580 | USD: 53.82 |
|
|
 |
65-2018-97 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 70 HTNB2010-300-4 | HTNB2010-300-4 | 1piece | JPY: 8,580 | USD: 53.82 |
|
|
 |
65-2018-98 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60 HTNB2015-120-4 | HTNB2015-120-4 | 1piece | JPY: 6,435 | USD: 40.37 |
|
|
 |
65-2018-99 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60 HTNB2015-120-6 | HTNB2015-120-6 | 1piece | JPY: 6,435 | USD: 40.37 |
|
|
 |
65-2019-01 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60 HTNB2015-160-4 | HTNB2015-160-4 | 1piece | JPY: 7,020 | USD: 44.04 |
|
|
 |
65-2019-02 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60 HTNB2015-160-6 | HTNB2015-160-6 | 1piece | JPY: 7,020 | USD: 44.04 |
|
|
 |
65-2019-03 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60 HTNB2015-200-4 | HTNB2015-200-4 | 1piece | JPY: 7,020 | USD: 44.04 |
|
|
 |
65-2019-04 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60 HTNB2015-200-6 | HTNB2015-200-6 | 1piece | JPY: 7,020 | USD: 44.04 |
|
|
 |
65-2019-05 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 30 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 70 HTNB2015-300-4 | HTNB2015-300-4 | 1piece | JPY: 8,970 | USD: 56.27 |
|
|
 |
65-2019-06 | Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 30 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 70 HTNB2015-300-6 | HTNB2015-300-6 | 1piece | JPY: 8,970 | USD: 56.27 |
|
|
 |
65-2019-07 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x Under-Neck Length 10 x Neck Taper Angle 1 degrees 30 "x Blade Length 1.6 x Total Length 60 HTNB2020-100-3 | HTNB2020-100-3 | 1piece | JPY: 6,581 | USD: 41.28 |
|
|
 |
65-2019-08 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-120-4 | HTNB2020-120-4 | 1piece | JPY: 6,581 | USD: 41.28 |
|
|
 |
65-2019-09 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-120-6 | HTNB2020-120-6 | 1piece | JPY: 6,581 | USD: 41.28 |
|
|
 |
65-2019-10 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 16 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-160-4 | HTNB2020-160-4 | 1piece | JPY: 6,581 | USD: 41.28 |
|
|
 |
65-2019-11 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 16 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-160-6 | HTNB2020-160-6 | 1piece | JPY: 6,581 | USD: 41.28 |
|
|
 |
65-2019-12 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 20 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-200-4 | HTNB2020-200-4 | 1piece | JPY: 7,020 | USD: 44.04 |
|
|
 |
65-2019-13 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 20 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60 HTNB2020-200-6 | HTNB2020-200-6 | 1piece | JPY: 7,020 | USD: 44.04 |
|
|
 |
65-2019-14 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 30 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 70 HTNB2020-300-4 | HTNB2020-300-4 | 1piece | JPY: 9,295 | USD: 58.31 |
|
|
 |
65-2019-15 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 30 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 70 HTNB2020-300-6 | HTNB2020-300-6 | 1piece | JPY: 9,295 | USD: 58.31 |
|
|
 |
65-2019-16 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 40 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 80 HTNB2020-400-4 | HTNB2020-400-4 | 1piece | JPY: 11,359 | USD: 71.25 |
|
|
 |
65-2019-17 | Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 40 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 80 HTNB2020-400-6 | HTNB2020-400-6 | 1piece | JPY: 11,359 | USD: 71.25 |
|
|
 |
65-2019-18 | Carbide 2-Flute Tapered Neck Ball End Mill, R2 x Neck Length 60 x Neck Taper Angle 1 degree 30 "x Blade Length 3.2 x Total Length 120 HTNB2040-600-3 | HTNB2040-600-3 | 1piece | JPY: 22,750 | USD: 142.71 |
|