65-1987-75 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 1 x Blade Length 5 x Total Length 60 x Shank Diameter 4 CXES4010-0500
기능
- Vibration is suppressed by unequal division and unequal lead specifications.
- By adopting a high-toughness type that is hard to chip in cemented carbide, and by applying fine tuning such as a special groove shape, ultra-high-efficiency cutting that has never been achieved before is possible.
- It is possible to obtain a good finish surface not only in high-efficiency machining but also in finishing.
- The coating has a low friction type and provides excellent chip discharge and abrasion resistance.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
사양
- Blade diameter (mm): 1
- Blade length (mm): 5
- Total length (mm): 60
- Shank diameter (mm): 4
- Number of blades: 4
- Helix angle (degrees): 37 ~ 40
- Surface treatment: UTCOAT
- Compatible Work Materials: Carbon Steel, Alloy Steel, Pre-hardened Steel, Copper, Quenched (up to 55 HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy
- Material/Finish: Super MG
- Mass: 10 g
- Country of origin: Japan
- Securities Code: 217 -8706
| 주문 번호 | 65-1987-75 | |
|---|---|---|
| 모델 번호 | CXES4010-0500 | |
| JAN 코드 | 4560295112476 | |
| 표준 가격 |
JPY: 5,430
USD: 34.06
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-1987-75 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 1 x Blade Length 5 x Total Length 60 x Shank Diameter 4 CXES4010-0500 | CXES4010-0500 | 1piece | JPY: 5,430 | USD: 34.06 |
|
|
 |
65-1987-76 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 2 x Blade Length 10 x Total Length 60 x Shank Diameter 4 CXES4020-1000 | CXES4020-1000 | 1piece | JPY: 5,080 | USD: 31.87 |
|
|
 |
65-1987-77 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 3 x Blade Length 15 x Total Length 60 x Shank Diameter 6 CXES4030-1500 | CXES4030-1500 | 1piece | JPY: 5,820 | USD: 36.51 |
|
|
 |
65-1987-78 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 4 x Blade Length 20 x Total Length 60 x Shank Diameter 6 CXES4040-2000 | CXES4040-2000 | 1piece | JPY: 6,110 | USD: 38.33 |
|
|
 |
65-1987-79 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 5 x Blade Length 25 x Total Length 70 x Shank Diameter 6 CXES4050-2500 | CXES4050-2500 | 1piece | JPY: 6,570 | USD: 41.21 |
|
|
 |
65-1987-80 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 6 x Blade Length 30 x Total Length 80 x Shank Diameter 6 CXES4060-3000 | CXES4060-3000 | 1piece | JPY: 7,400 | USD: 46.42 |
|
|
 |
65-1987-82 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 8 x Blade Length 40 x Total Length 90 x Shank Diameter 8 CXES4080-4000 | CXES4080-4000 | 1piece | JPY: 13,190 | USD: 82.74 |
|
|
 |
65-1987-84 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square End Mill, Outer Diameter 10 x Blade Length 50 x Total Length 100 x Shank Diameter 10 CXES4100-5000 | CXES4100-5000 | 1piece | JPY: 15,700 | USD: 98.48 |
|
|
 |
65-1987-86 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square End Mill, Outer Diameter 12 x Blade Length 60 x Total Length 120 x Shank Diameter 12 CXES4120-6000 | CXES4120-6000 | 1piece | JPY: 22,360 | USD: 140.26 |
|