65-1981-24 UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.5 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.5
기능
- Suitable for machining deep groove shapes by undercutting the neck.
- Compatible Work Materials: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Copper, Quenched Steel (~55HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
사양
- Blade diameter (mm): 0.1
- Blade length (mm): 0.1
- Total length (mm): 45
- Shank diameter (mm): 4
- Number of blades: 2
- Helix angle (degrees): 30
- Surface treatment: UTCOAT
- Surface treatment: UT coating
- Material/Finish: Ultrafine Grain Alloy (Super MG)
- Mass: 10 g
- Country of origin: Japan
- Securities Code: 247 -4243
| 주문 번호 | 65-1981-24 | |
|---|---|---|
| 모델 번호 | C-CER2001-0.5 | |
| JAN 코드 | 4560295116719 | |
| 표준 가격 |
JPY: 9,945
USD: 62.34
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-1981-23 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.3 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.3 | C-CER2001-0.3 | 1piece | JPY: 9,068 | USD: 56.84 |
|
|
 |
65-1981-24 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.5 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.5 | C-CER2001-0.5 | 1piece | JPY: 9,945 | USD: 62.34 |
|
|
 |
65-1981-25 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 0.75 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-0.75 | C-CER2001-0.75 | 1piece | JPY: 11,018 | USD: 69.07 |
|
|
 |
65-1981-26 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.1 x Effective Length 1 x Blade Length 0.1 x Total Length 45 x Shank Diameter 4 C-CER2001-1 | C-CER2001-1 | 1piece | JPY: 12,383 | USD: 77.62 |
|
|
 |
65-1981-27 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 0.5 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-0.5 | C-CER20015-0.5 | 1piece | JPY: 9,263 | USD: 58.06 |
|
|
 |
65-1981-28 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 0.75 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-0.75 | C-CER20015-0.75 | 1piece | JPY: 10,238 | USD: 64.18 |
|
|
 |
65-1981-29 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.15 x Effective Length 1 x Blade Length 0.15 x Total Length 45 x Shank Diameter 4 C-CER20015-1 | C-CER20015-1 | 1piece | JPY: 10,238 | USD: 64.18 |
|
|
 |
65-1981-30 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.2 x Effective Length 2 x Blade Length 0.3 x Total Length 45 x Shank Diameter 4 C-CER2002-2 | C-CER2002-2 | 1piece | JPY: 10,140 | USD: 63.56 |
|
|
 |
65-1981-31 | UT Coat 2-Flute Long Neck Square C-CER Outer Diameter 0.2 x Effective Length 3 x Blade Length 0.3 x Total Length 45 x Shank Diameter 4 C-CER2002-3 | C-CER2002-3 | 1piece | JPY: 10,433 | USD: 65.40 |
|
|
 |
65-1981-32 | UT Coat 2 Flutes Long Neck Square C-CER Outer Diameter 0.3 x Effective Length 1.5 x Blade Length 0.4 x Total Length 45 x Shank Diameter 4 C-CER2003-1.5 | C-CER2003-1.5 | 1piece | JPY: 6,143 | USD: 38.51 |
|