기능

• A mobile battery that can be magnetically fixed to a MagSafe compatible iPhone. Conforming to the USB Power Delivery standard, the total maximum output is 20 W and the capacity is 10,000 mAh. *The machine does not have a wireless charging function.
• A finger belt that you can use through your fingers, so you can keep your phone and battery stable. The finger belt can also be used as a stand so you can watch videos while charging. The design does not damage the back lens of iPhone, so you can use it safely. *Support for iPhone12 series (as of March 2021)
• The high-performance IC installed in the USB port automatically identifies the connected device and provides the fastest charging at the optimum output.
• It supports "collectively charging," which allows you to charge your smartphone and mobile battery while the charging cable is connected.
• Equipped with a "low current mode" that allows small electronic devices with low charging current such as Bluetooth headsets and earphones to be charged at an optimum current. *Only USB-A ports are supported.
• You can charge the mobile battery in about 4 hours and 30 minutes, which greatly reduces the charge time. *USB Power Delivery Time after connecting the USB Type-C (TM) (USB-C (TM)) to USB Type-C (TM) (USB-C (TM)) cable to the 18 W or higher AC charger and charging. *USB Type-C and USB-C are trademarks of USB Implementers Forum. • This high-output model has 1 USB-A port and 1 USB-C (TM) port, and can output a total of 20 W of 2 ports. *The output from the USB Type-C (TM) (USB-C (TM)) port takes priority, and the remaining output wattage is output from the USB-A port.
• This product (10,000 mAh battery) can charge your smartphone about 3.3 times. *This is the recommended number of times to charge a fully charged smartphone with a battery capacity of about 1800mAh. The power may turn on while charging is in progress, or if you are using a device, it may not be possible to charge up to the specified value.
• A small, portable USB Type-C (TM) to USB Type-C (TM) cable is included.
• You can charge the battery by connecting the supplied cable to the USB Type-C (USB-C (TM)) port on the printer and then connecting it to a compatible AC adapter.
• The USB Type-C (TM) (USB-C (TM)) connector can be inserted on both sides, regardless of whether the connector is used or not.
• Equipped with a reliable USB Type-C (TM) (USB-C (TM)) connector that has passed the test specified by the USB Association, you can use it safely and securely.
• You can also charge your iPhone by using the Lightning cable that comes with or supports your iPhone.
• This product uses magnets. Keep magnetic cards (credit cards, cash cards, etc.) away.
• The remaining battery level can be checked by lighting the four-step LED lamp.
• It is equipped with a rechargeable lithium-ion battery that can be used repeatedly about 500 times.
• The built-in rechargeable lithium-ion battery is designed for safety in accordance with JIS C8711 and JIS C8714.
• It is a highly safe product that conforms to the technical standards of the Electrical Appliance and Material Safety Act (PSE) of Japan.
• It is a safe circuit design with 6 protection functions: overcharge, overdischarge, overvoltage, and overcurrent prevention function, short circuit protection function, and temperature detection function.
• * The battery is charged at about 70% when shipped from the factory. Rechargeable lithium-ion batteries discharge over time, so it is recommended to charge them before use.