64-8560-40 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 20 HTNRS4015-032008
기능
- 4-Flute Taper Neck Radius End Mill for Processing High-Hardness Materials.
- Cutting resistance is reduced by the corner R shape that smoothly connects from the tip to the outer periphery, and vibration is suppressed by the unequal division shape.
- Even in deep carving, stable machining and high quality machining surfaces are achieved.
- Uses HARDMAX coat for long life in processing of high hardness materials.
- Compatible with all coolant.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
사양
- Corner radius (mm): R 0.3
- Blade diameter (mm): 1.5
- Number of blades: 4
- Blade length (mm): 1.5
- Total length (mm): 60
- Shank diameter (mm): 4
- Helix angle: 45 degrees
- Surface treatment: HARD MAX
- Compatible Work Material: Pre-hardened Steel, Quenched Steel (55 HRC) (60 HRC) (65 HRC), Cast Iron
- Material/Finish: Super MG
- Country of origin: Japan
- Securities Code: 195 -1219
| 주문 번호 | 64-8560-40 | |
|---|---|---|
| 모델 번호 | HTNRS4015-032008 | |
| JAN 코드 | 4560295109155 | |
| 표준 가격 |
JPY: 8,125
USD: 50.93
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8560-34 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 6 HTNRS4010-020608 | HTNRS4010-020608 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-35 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 10 HTNRS4010-021008 | HTNRS4010-021008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-36 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 20 HTNRS4010-022008 | HTNRS4010-022008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-37 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 1 x Neck Length 30 HTNRS4010-023008 | HTNRS4010-023008 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
64-8560-38 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 6 HTNRS4015-030608 | HTNRS4015-030608 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-39 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 10 HTNRS4015-031008 | HTNRS4015-031008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-40 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 20 HTNRS4015-032008 | HTNRS4015-032008 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
64-8560-41 | 4 Flute Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 1.5 x Neck Length 30 HTNRS4015-033008 | HTNRS4015-033008 | 1piece | JPY: 9,750 | USD: 61.12 |
|