64-8475-46 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square CXES Outer Diameter 3 x Blade Length 12 x Total Length 60 x Shank Diameter 6 CXES4030-1200
기능
- Vibration is suppressed by unequal division and unequal lead specifications.
- By adopting a high-toughness type that is hard to chip in cemented carbide, and by applying fine tuning such as a special groove shape, ultra-high-efficiency cutting that has never been achieved before is possible.
- It is possible to obtain a good finish surface not only in high-efficiency machining but also in finishing.
- The low friction type coating provides excellent chip discharge and abrasion resistance.
- Compatible Work Materials: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Copper, Quenched Steel (~55HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy
사양
- Blade length (mm): 12
- Total length (mm): 60
- Shank diameter (mm): 6
- Outer diameter (mm): 3
- Number of blades: 4
- Surface treatment: UTCOAT
- Surface treatment: UTCOAT
- 4-Flute UTCOAT
- Manufactured at factories with ISO 9001 certification
- Manufactured at factories with ISO 14001 certification
- Unequal split/Unequal lead specification
- Material/Finish:
- SuperMG
- Note:
- Shank taper angle is a guide.
- If you are concerned about interference with the work, make sure to measure and check.
- The tool outside diameter may be smaller than the shank diameter.
- Be careful of contact between the shank and the work piece.
- Country of origin: Japan
- Securities Code: 149 -4160
| 주문 번호 | 64-8475-46 | |
|---|---|---|
| 모델 번호 | CXES4030-1200 | |
| JAN 코드 | 4560295103955 | |
| 표준 가격 |
JPY: 4,480
USD: 28.08
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8475-40 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square CXES Outer Diameter 1 x Blade Length 3 x Total Length 60 x Shank Diameter 4 CXES4010-0300 | CXES4010-0300 | 1piece | JPY: 3,800 | USD: 23.82 |
|
|
 |
64-8475-41 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square CXES Outer Diameter 1 x Blade Length 4 x Total Length 60 x Shank Diameter 4 CXES4010-0400 | CXES4010-0400 | 1piece | JPY: 4,180 | USD: 26.20 |
|
|
 |
64-8475-43 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square CXES Outer Diameter 2 x Blade Length 6 x Total Length 60 x Shank Diameter 4 CXES4020-0600 | CXES4020-0600 | 1piece | JPY: 3,550 | USD: 22.25 |
|
|
 |
64-8475-44 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square CXES Outer Diameter 2 x Blade Length 8 x Total Length 60 x Shank Diameter 4 CXES4020-0800 | CXES4020-0800 | 1piece | JPY: 3,900 | USD: 24.45 |
|
|
 |
64-8475-46 | 4 Flutes Unequally Divided Unequal Lead High-Efficiency Square CXES Outer Diameter 3 x Blade Length 12 x Total Length 60 x Shank Diameter 6 CXES4030-1200 | CXES4030-1200 | 1piece | JPY: 4,480 | USD: 28.08 |
|