AS ONE AS ONE

나열된 제품 : 300만개
사용 방법
Cách sử dụng
연락처
UNION TOOL CO.

64-8475-34　4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2.5 x Corner Radius R 0.3 x Blade Length 6.25 x Total Length 50　CXERS4025-03-0625

기능

  • Unequal division and unequal lead specifications suppress vibration and realize high-efficiency machining.
  • Uses high-toughness cemented carbide material that is hard to chip.
  • Superior abrasion resistance, compatible with high-efficiency machining and finishing.
  • The low friction type coating provides excellent chip discharge and abrasion resistance.
  • The unique corner R shape reduces cutting resistance and achieves stable machining.
  • Work Material: Carbon Steel, Alloy Steel, Pre-Hardened Steel, Copper, Quenched Steel (~55HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy

사양

  • Blade diameter (mm): 2.5
  • Blade length (mm): 6.25
  • Total length (mm): 50
  • Shank diameter (mm): 4
  • Corner radius (mm): R 0.3
  • Number of blades: 4
  • Helix angle: 37 ~ 40
  • Surface treatment: UT COAT
  • Surface treatment: UT COAT
  • Helix angle: 37 ~ 40
  • Work Material: Carbon Steel, Alloy Steel, Pre-hardened Steel, Copper, Quenched Steel (up to 55 HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy
  • Material/Finish:
  • Super MG
  • Note:
  • Shank taper angle is a guide.
  • If interference with the work is necessary, make sure to measure and check.
  • Be careful of contact between the shank and the work piece.
  • Country of origin: Japan
  • Securities Code: 195 -1207
  •  
주문 번호 64-8475-34
모델 번호 CXERS4025-03-0625
JAN 코드 4560295108585
표준 가격 JPY: 5,566 USD: 34.89
Excange rate 1USD= 159.53JPY
Valid price in Japan
수량 1piece
일본의 주식
공급자 재고

다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)

제품 이미지 주문 번호 이름 모델 번호 수량 표준 가격 일본에서의 유효 가격 재고
[공급자 재고]
64-8475-24 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1 x Corner Radius R 0.1 x Blade Length 2.5 x Total Length 50　CXERS4010-01-025 CXERS4010-01-025 1piece JPY: 5,566 USD: 34.89

64-8475-25 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 2.5 x Total Length 50　CXERS4010-02-025 CXERS4010-02-025 1piece JPY: 5,566 USD: 34.89

64-8475-26 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1 x Corner Radius R 0.3 x Blade Length 2.5 x Total Length 50　CXERS4010-03-025 CXERS4010-03-025 1piece JPY: 5,931 USD: 37.18

64-8475-27 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.1 x Blade Length 3.75 x Total Length 50　CXERS4015-01-0375 CXERS4015-01-0375 1piece JPY: 5,566 USD: 34.89

64-8475-28 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.2 x Blade Length 3.75 x Total Length 50　CXERS4015-02-0375 CXERS4015-02-0375 1piece JPY: 5,566 USD: 34.89

64-8475-29 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 3.75 x Total Length 50　CXERS4015-03-0375 CXERS4015-03-0375 1piece JPY: 5,931 USD: 37.18

64-8475-30 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.1 x Blade Length 5 x Total Length 50　CXERS4020-01-050 CXERS4020-01-050 1piece JPY: 5,209 USD: 32.65

64-8475-31 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.2 x Blade Length 5 x Total Length 50　CXERS4020-02-050 CXERS4020-02-050 1piece JPY: 5,209 USD: 32.65

64-8475-32 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.3 x Blade Length 5 x Total Length 50　CXERS4020-03-050 CXERS4020-03-050 1piece JPY: 5,566 USD: 34.89

64-8475-33 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Blade Length 5 x Total Length 50　CXERS4020-05-050 CXERS4020-05-050 1piece JPY: 5,566 USD: 34.89

64-8475-34 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2.5 x Corner Radius R 0.3 x Blade Length 6.25 x Total Length 50　CXERS4025-03-0625 CXERS4025-03-0625 1piece JPY: 5,566 USD: 34.89

64-8475-35 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2.5 x Corner Radius R 0.5 x Blade Length 6.25 x Total Length 50　CXERS4025-05-0625 CXERS4025-05-0625 1piece JPY: 5,566 USD: 34.89

64-8475-36 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 3 x Corner Radius R 0.2 x Blade Length 7.5 x Total Length 60　CXERS4030-02-075 CXERS4030-02-075 1piece JPY: 5,973 USD: 37.44

64-8475-37 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 3 x Corner Radius R 0.3 x Blade Length 7.5 x Total Length 60　CXERS4030-03-075 CXERS4030-03-075 1piece JPY: 6,379 USD: 39.99

64-8475-38 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 3 x Corner Radius R 0.5 x Blade Length 7.5 x Total Length 60　CXERS4030-05-075 CXERS4030-05-075 1piece JPY: 6,379 USD: 39.99

64-8475-39 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 12 x Corner Radius R 0.3 x Blade Length 30 x Total Length 100　CXERS4120-03-300 CXERS4120-03-300 1piece JPY: 16,250 USD: 101.86

64-8475-42 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 1.5 x Blade Length 6 x Total Length 50 x Shank Diameter 4　CXES4015-0600 CXES4015-0600 1piece JPY: 4,180 USD: 26.20

64-8475-45 4 Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 2.5 x Blade Length 10 x Total Length 50 x Shank Diameter 4　CXES4025-1000 CXES4025-1000 1piece JPY: 3,900 USD: 24.45

이 페이지는 AS ONE CORPORATION에서 판매한 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2.5 x Corner Radius R 0.3 x Blade Length 6.25 x Total Length 50의 페이지입니다. 액셀 글로벌은 연구개발, 생산, 반도체, 의료, 간호간호, 식품위생 등 다양한 분야에서 사용되는 제품이 300만개 이상 나열된 웹사이트다.