기능

• You don't have to worry about the direction of the connector. Both Micro-B and USBA can be used without worrying about the direction of the double-sided cable connector. • This cable connects a PC with USB and A connectors to a smartphone, tablet, or USB device that has a Micro-USB connector (Micro-B, Micro-AB) knife.
• You can charge smartphones and tablets and transfer data.
• This is a USB cable that can be inserted on both sides without worrying about microUSB, B connector/USB, or A connector.
• The base (SR) of the connector and cable uses a reinforced SR that does not scratch the cable coating.
• Uses highly durable nylon mesh cables.
• This fast charging cable supports up to 5 V DC and 2.4 A when charging. (KU-WRMCB20BK up to 2.1 A) (In the QC2.0 environment, DDC9V, 1.5 A/DC12V, 1.5 A is supported.)
• This is a high-quality cable that supports the USB2.0 "Hi-SPEED" mode (transfer speed 480Mbps). This cable clears the characteristics specified in USB2.0, such as impedance and signal attenuation.
• * USB1.1/1.0 standard devices are also compatible.
• A double shielded cable with a sealed aluminum shield inside a copper high density knitted shield material to protect your important data from most noise from low to high frequencies.
• Uses noise-resistant twisted pair wire with two core wires each. (Signal lines only) • Uses pins (contacts) that have been gold-plated to resist rust and reduce the risk of signal deterioration over time. Safety precautions Incorrect handling may cause burns or fire. It contains important information for safe use. Be sure to read the following information before installing or starting use.
• * Do not use a connector whose terminal part has been bent.
• * When connecting the connector, check the connection direction and insert it straight.
• * Be careful not to allow liquid (sweat, drinking water) or foreign matter (Fine dust, dust, metal pieces, etc.) to adhere to the connector. Handling precautions
• * When connecting or disconnecting the cable, be sure to hold the connector section (plug) without pulling the cable.
• * "Orientation" is provided for the plug and connector. Check the orientation carefully when inserting the plug.
• * When inserting/removing the machine, be sure to hold the connector section and do not apply excessive force. Pulling the cable or applying excessive force can cause damage or malfunction.
• Before connecting the machine to any device, read the instruction manual of each device carefully.
• Do not connect or disconnect the machine with wet hands.
• * Do not wet yourself with water, drinking water, or urine.
• * Do not use in places with high temperature or high humidity.
• * Do not use, store, or leave in hot places such as near a fire, in direct sunlight, or in a car under the hot sun.
• * Do not put the product in a microwave oven or other cooking equipment or a high-pressure container.
• * Do not step on the machine with the furniture or insert it in the door.
• * Do not disassemble or process the machine.
• * Do not give strong impact or hurl.
• * Discontinue use and use a new cable if there is any problem such as damage to the cable cover or wobbling of the connector.
• * Keep out of the reach of children. (Parents/guardians should tell us how to handle this product when children use it. Also, make sure that the machine is being used as instructed even while in use.) * This machine is for indoor use. ・Connecting a USB charger (AC adapter) with a different output voltage can cause malfunction, failure, heating, smoke, or fire of the machine and connected devices. If you connect and use a USB charger (AC adapter) with an extremely high rated output current, a non-standard current may flow through the USB connector or into the printer, causing the printer and other connected devices to malfunction, heat up, smoke, or catch fire. ・Sanwa Supply shall not be liable for any loss of data, programs or equipment malfunction or damage caused by the use of this product. Please understand this in advance, and take measures such as taking a backup periodically.
• * Specifications and appearance are subject to change without notice in order to improve product safety and quality.