기능

• This is the "Pile one" mobile battery for smartphones, which is convenient for layering because it is not bulky and thin, and has a round shape that fits your hand.
• This is a model with a luxurious and stylish design with two textures, glossy and matte on the front and a leather shibo finish on the back.
• The high-performance IC installed in the USB port automatically identifies the connected device and provides the fastest charging at the optimum output.
• It supports "charging all at once," which allows you to charge your smartphone and mobile battery while the main charging cable is connected.
• * When the battery level of the mobile battery reaches 0%, charging the mobile battery takes priority, and the power to the smartphone starts after fully charging.
• You can charge the mobile battery in about 2 hours and 40 minutes, which greatly reduces the charge time. *When using an AC adapter with output of 1.5 A or more.
• You can also charge the battery by connecting it to the USB port on your computer.
• This is a high-power model with a maximum output of 1.5 A.
• You can charge your smartphone about once with the machine (3000 mAh battery).
• * This is the recommended number of times to charge a fully charged smartphone with a battery capacity of approximately 1800mAh.
• * The power may be turned on while charging is in progress, or if you are using a device, you may not be able to charge up to the indicated value.
• It comes with a micro USB cable with a cone-shaped connector that is easy to use when holding it together.
• You can charge the battery by connecting the supplied cable to the charging USB (micro-B) port of the machine and then connecting it to a compatible AC adapter.
• You can also charge your iPhone by using the Lightning cable that comes with or supports your iPhone.
• The battery level can be checked by lighting the LED lamp in four levels.
• It is equipped with a rechargeable lithium-ion battery that can be used about 500 times repeatedly.
• The built-in rechargeable lithium-ion battery is designed for safety in accordance with JIS C8711 and JIS C8714.
• Anshin circuit design with overcharge, overdischarge, overvoltage, overcurrent prevention function and short circuit protection function.
• * The battery is charged at about 70% when shipped from the factory. Rechargeable lithium-ion batteries discharge over time, so it is recommended to charge them before use.