Yamato Scientific Co., Ltd.

61-9661-79 [단종]탄산 부화기 IT400

기능

  • The inner tank has a seamless, flat structural design. All corners are marked with R, and the four corners at the back of the inner tank have a ball corner structure that prevents contamination and is easy to clean.
  • The possibility of contamination is suppressed by slight air stirring only when CO2 is introduced, and the internal gas phase is made uniform. The fan also automatically stops when the door is opened. There is no vibration.
  • A temperature sensor is installed in the inner tank to control the temperature so that the temperature in the inner tank is not affected even if the outside air temperature fluctuates.
  • The information is displayed on the display so that you can easily see the operating status of the device and the operating conditions under which it is running.
  • The size of the inner tank was designed with ease of petri dish installation in mind. The optional tray for petri dishes can be installed efficiently, and the tray can be installed efficiently on the shelf board of the main unit for easy removal.
  • There is no drain in the tank, and no wastewater treatment is required.
  • Shelf receiver unit can be removed.
  • Detaching the fan in the tank is easy without using tools. It is also easy to disassemble and assemble ducts in the tank, shelf receptacles, etc.
  • The structure makes it easy to replace the fan motor, temperature sensor and concentration sensor.
  • An overheat prevention mechanism that automatically sets the temperature to +2°C in accordance with the set temperature and an independent excess rise prevention device are provided as standard equipment. The temperature sensor and CO2 sensor are monitored to stop temperature control only in case of temperature abnormality, and to stop CO2 control only in case of CO2 concentration abnormality.
  • In the event of a power failure, samples are maintained by a heat-insulating structure with a well-insulated water jacket and a mechanism to stop the supply of CO2.
  • Note If a sample that generates heat is placed in the device, the temperature may not be controlled normally.

사양

  • 가열 방법: 워터자켓
  • 가습 시스템: 배트 관수에 의한 자연증발
  • CO2 농도 제어 시스템: CO2 센서 감지 제어
  • 동요 체계: 선풍기에 의한 미풍 순환
  • 주변 온도 범위: 섭씨 5 - 30도
  • 작동 온도 범위: 실내 온도 +5 - 50°C
  • 사용 습도 범위: 95%R.H. 이상
  • CO2 농도 조절 범위: 0.1 - 20.0%
  • 온도 제어 정확도: +/- 0.1°C(37°C)
  • 온도 분포 정확도: +/- 0.2°C(37°C)
  • CO2 농도 제어 정확도: +/- 0.1%(5% 이산화탄소)
  • 내부 탱크 치수(너비 x 깊이 x 높이 mm): 409 x 426 x 414
  • 외부 치수(너비 x 깊이 x 높이)(mm): 545 x 646 x 805 *돌출부는 포함하지 않습니다.
  • 내부 용량(약): 72리터
  • 선반 보드 적재 용량: 5kg/시트 이상
  • 선반 대기 수: 12단계
  • 전원(50/60Hz): AC100V
  •  
주문 번호 61-9661-79
모델 번호 IT400
JAN 코드 4573181503890
표준 가격 JPY: 850,000 USD: 5,331.83
Excange rate 1USD= 159.42JPY
Valid price in Japan
수량 1piece
  단종
일본의 주식 -

다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)

제품 이미지 주문 번호 이름 모델 번호 Width (Frontage)
Height
수량 표준 가격 일본에서의 유효 가격 재고
[공급자 재고]
61-9661-79 [단종]탄산 부화기 IT400 IT400 545mm 805mm 1piece JPY: 850,000 USD: 5,331.83

-

61-9661-80 [단종]탄산 부화기 IT600 IT600 745mm 905mm 1piece JPY: 1,050,000 USD: 6,586.38

-

61-9661-78 [단종]탄산 부화기 IT820 IT820 745mm 1811mm 1piece JPY: 1,900,000 USD: 11,918.20

-

관련 제품