기능

• Holders for fixing block-shaped optical elements such as cube beam splitters and rectangular prisms.
• By installing the cube prism so that the supports of the prism presser are diagonal, all four sides of the prism can be used.
• The KKD type has a two-direction tilt and rotation adjustment mechanism, allowing fine adjustment of the reflected beam.
• As long as the device size is within the specified range, any size can be fixed.
• Since the knob of the prism presser mechanism and the presser are independent, the prism does not rotate together even if the knob is turned.
• A θαβ shaft compact thin stage (KKD-C) with prism presser and strut removed is also available.
• * KKD-25PH and PLH-25 do not apply pressure when pressing the prism, and there is a risk of the element falling off.
• * Make sure that the prism is fixed before use.
• * For the KKD type, if the prism presser is lifted after adjustment, the prism table may move and the adjustment of inclination and rotation may be misaligned.
• * Do not touch the prism presser after adjustment.