사양

• Heating Method: Plate Heating Method
• Performance
• Temperature Adjustment Range: Room Temperature +10~200°C
• Temperature adjustment accuracy: ±1°C or less
• Achieved Vacuum Degree: 66.5 Pa (0.5Torr) or Less (When Using an Oil Rotary Vacuum Pump)
• Function
• Temperature control: P.I.D control, SSR output
• Temperature Sensor: Platinum Temperature Measuring Resistor Pt100Ω
• Temperature Setting/Display: Sheet Key Setting/Digital Display (Minimum Digit 1°C)
• Safety Features: Variable Independent Excess Temperature Rise Prevention Device, Fuse, Temperature Sensor Malfunction, Watchdog
• Configuration
• Heater: 250 W
• Glass Chamber: Bell Jar Type
• Vacuum gauge: Bourdon tube type (-100~0KPa)
• Hot Plate: Aluminum Die Cast (Ceramic Coating)
• Atmospheric Release Valve: Manual Needle Valve
• Standard
• Nozzle Diameter: Outer Diameter φ10.5 mm Hose Port (Suction Port, Leak Port)
• Internal Dimensions (mm): φ150 x 250
• Wetted Part Material: Stainless Steel, Silicon, Viton ®, Teflon ®, PP, Ceramic, Brass
• Operating Ambient Temperature Range: 5~35°C
• External Dimensions (mm): 200 x 240 x 150 (405) * Dimensions in () include protrusions
• Weight: Approximately 6.2 kg
• Power Input/Power Voltage: 3 A, 300VA/100 VAC 50/60Hz
• *The performance is at room temperature of 20°C, rated power supply voltage, and no load.
• *Temperature adjustment accuracy is the surface temperature of the center of the hot plate.
• *The achieved vacuum depends on the vacuum pump used. Diaphragm type vacuum pump cannot reach due to the capacity of the pump. Other operating conditions may not fall within this range.
• *Vacuum pump is sold separately.
• *Select a vacuum pump with a displacement of 20 L/min or more.
• Product code: 287380
• *There will be two boxes.
•