60-9239-59 Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-1200-PB
기능
- Suitable for shoulder milling to full grooving. With full groove processing, a maximum of 2XD cut is possible.
- Optimized flute shape for good chip processing.
- Unequal pitch that does not sway even with full groove processing.
- Wrapping processing is also possible.
- The edge line has been strengthened to achieve long life even in severe machining.
- For steel and cast iron.
- For Dry Processing (Wet Processing Also Possible)
사양
- Number of Blades ZEFP (Sheets): 4
- Cutting Diameter DC (mm): 12
- Maximum Cut APMX (mm): 26
- Functional Length LF (mm): 83
- Shank Diameter DCON (mm): 12
- Helix Angle FHA (°): 42
- Coating: PVD
- Link Diameter (mm): 12
- Helix Angle (°): 42
- Blade Diameter (mm): 12
- Number of Flutes: 4
- Flute Length (mm): 26
- Total length (mm): 83
- Surface Treatment: PVD
- shank: weldon shank
- center cut
- Country of Origin: Italy
- Securities Code: 580-9294
패키지 크기：100×20×20 mm 130 g [패키지 크기 정보]
| 주문 번호 | 60-9239-59 | |
|---|---|---|
| 모델 번호 | 2P342-1200-PB | |
| 표준 가격 |
JPY: 36,600
USD: 227.73
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-9239-52 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0200-PA | 2P342-0200-PA | 1piece | JPY: 13,500 | USD: 84.00 |
|
|
 |
60-9239-53 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0300-PA | 2P342-0300-PA | 1piece | JPY: 15,000 | USD: 93.33 |
|
|
 |
60-9239-54 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0400-PA | 2P342-0400-PA | 1piece | JPY: 15,000 | USD: 93.33 |
|
|
 |
60-9239-55 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0500-PA | 2P342-0500-PA | 1piece | JPY: 15,000 | USD: 93.33 |
|
|
 |
60-9239-56 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0600-PB | 2P342-0600-PB | 1piece | JPY: 15,400 | USD: 95.82 |
|
|
 |
60-9239-57 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-0800-PB | 2P342-0800-PB | 1piece | JPY: 21,600 | USD: 134.40 |
|
|
 |
60-9239-58 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-1000-PB | 2P342-1000-PB | 1piece | JPY: 27,200 | USD: 169.24 |
|
|
 |
60-9239-59 | Coromill Pruler Carbide End Mill for Heavy Cutting Milling (730) 2P342-1200-PB | 2P342-1200-PB | 1piece | JPY: 36,600 | USD: 227.73 |
|