60-6184-79 Sfad Type Adapter With Stainless Nut R3/4 X G3/4 SFAD-20
기능
- Taper external thread, parallel female thread (R x G).
- With non-asbestos packing.
- *Packing is a consumable item.
- *Install in a place where inspection and replacement are possible.
- *Maximum specification temperature is 214°C.
- *Heat resistant non-asbestos packing may cause seepage leakage.
- *Please soak the packing with water before use.
- *It cannot be used for air piping because there is a possibility of seepage leakage (slight leakage) due to insufficient tightening surface of the packing.
- *Do not apply piping stress to the packing part, resulting in single tightening.
- *This product is not weldable.
사양
- Nominal Diameter: R3/4 x G3/4
- Material: Stainless Steel (SCS13 A)
- Operating Temperature Range (Maximum Allowable Pressure): -20°C~40°C (2.00 MPa), ~100°C (1.65 MPa), ~150°C (1.50 MPa), ~200°C (1.40 MPa), ~214°C (1.35 MPa)
- Fluid used: cold/hot water, oil, steam
- L[mm]:39.5
| 주문 번호 | 60-6184-79 | |
|---|---|---|
| 모델 번호 | SFAD-20 | |
| JAN 코드 | 4573472225227 | |
| 표준 가격 |
JPY: 1,740
USD: 10.92
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-6184-78 | Sfad Type Adapter With Stainless Nut R1/2 X G1/2 SFAD-13 | SFAD-13 | 1piece | JPY: 1,360 | USD: 8.53 |
|
|
 |
60-6184-79 | Sfad Type Adapter With Stainless Nut R3/4 X G3/4 SFAD-20 | SFAD-20 | 1piece | JPY: 1,740 | USD: 10.92 |
|
|
 |
60-6184-80 | Sfad Type Adapter With Stainless Nut R1 X G1 SFAD-25 | SFAD-25 | 1piece | JPY: 2,500 | USD: 15.68 |
|