Palu, Punches & Kentang
Filter
- menurut grup Produk
- menurut Produk
Urutkan berdasar:
-
RS PRO 5mm x 9 Set Pukulan, (0 → 9) 251-750
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 3,100
USD: 19.43
-
S.C. PRO Lurus Tungsten Carbide Tip 394-190
Tungsten Carbide
Engineered pattern straight or straight/angle-tipped scribe with carbide tip. The tungsten carbide tipped scribe is suitable for use with hard and abrasive materials, such as stainless steel, anodized aluminum, ceramic, and glass, where the sharpness of a typical HSS scribe can rapidly become dull.1 produk ditemukan
JPY: 1,320
USD: 8.27
-
RS PRO Berlian Lurus Berlian Tanpa Skrip Plastik 394-217
Diamond Tip
Includes a 90 ° conical industrial diamond pocket clip top with a polished finish attached to steel that can be manually marked on very hard parts and materials. Can carve stainless steel, glass, ceramic, silica filled plastics Can permanently identify parts Best for manual scribing and splitting of glass rods up to 0.5 mm thick and ceramic or silicone materials Use part number 394-207 scribe for marking mild steel, aluminum, and other soft materials1 produk ditemukan
JPY: 7,760
USD: 48.64
-
RS PRO Rubber 550,0g 539-104
Rubber Hammer
Perfect for general industrial applications, metal working, woodworking and finishing work1 produk ditemukan
JPY: 2,650
USD: 16.61
-
RS Pro Round Polyethylene Mallet 480g 222-1530
Mallet Plastik. Fraget-mallet super-plastik Dengan kepala polietilena berbobot sangat tinggi, dilengkapi dengan pegangan abu. Kepala, yang tidak akan mengalami patah tulang atau delaminasi, dapat ditahan dengan aman oleh kedua kepala silsilah kayu dan bras. Kekuatan ini memiliki dampak kuat yang amat kuat ditambah dengan daya tahan lama dan perlawanan abrasif yang tinggi, tidak akan mewarnai ulang atau meninggalkan tanda-tanda bekas pada tempat kerja di antara industri manufaktur, jasa dan perakitan
1 produk ditemukan
JPY: 6,030
USD: 37.80
-
Facom 1.5 kg Lump Hammer Dengan Penanganan Ash 1262H.125
Palu. Kampung ini terbuat dari baja karbon. Logam palsu ini secara signifikan meningkatkan kinerja alat ini dan kehidupan pelayanan. Wajah yang mencolok datar dan berbinar dan pegangan di kayu abu. Mallet ini memiliki desain keamanan tinggi dengan satu kayu dan satu sudut logam. Model: 1250 g
1 produk ditemukan
JPY: 9,670
USD: 60.62
-
Skrip Berujung Kaus Lurus DELA.1589.00
Karbide pen scriber. Tubuh baja Heksaonal dengan klip. Tips 12 mm dapat dikembalikan.
1 produk ditemukan
JPY: 1,840
USD: 11.53
-
Pukulan Facom Center 257.G
Facom 257.G Auto Center Punch, Sheathed. Memperkenalkan pukulan pusat profesional dari Facom, suatu alat tangan yang sangat tahan lama yang dirancang untuk secara aman dan efisien atau menandai serangkaian materi tugas berat seperti logam tanpa merusak material di sekitarnya. Pukulan pusat Facom dibuat dari baja hardened dengan tip keras sampai 57-60 HRc. Selesai dalam gaya hitam dan merah, menyediakan pin lubang tahan lama dengan properti pencegahan korosi. Pukulan kanan tengah Facom adalah sempurna untuk menandai atau menembus logam dengan ketepatan sebelum pengeboran. Fitur dan Manfaat:. Baja chrome-molybdenum yang tahan lama dengan chrome korek api menyelesaikan kelas ringan dan konstruksi tahan lama dengan pegangan ergonomik untuk peningkatan keselamatan Dampak yang dapat disesuaikan dari 15 sampai 25 kg Otomatis, sederhana untuk menggunakan mekanisme bertenaga musim semi Ujung ke 57 - 60 HRc Membuat inden atau menusuk logam dengan presisi tinggi. Aplikasi Khas:. Pin dan Pusat Punches adalah alat tangan yang digunakan untuk menandai bagian tengah lubang sebelum pengeboran untuk mencegah pengeboran menjadi "pengembara". Ketukan tengah pukulan pin tersedia dalam dua opsi: Otomatis, peralatan yang dimuat musim semi yang beroperasi tanpa kebutuhan untuk alat manual palu Standard yang membutuhkan pukulan palu untuk menciptakan sebuah pukulan pin dan pukulan tengah biasanya digunakan oleh: Pembuat Elektricians Tukang Kayu Roof installers Mekanik. Tanya Jawab:. ;i>Apa ini pukulan terbuat dari? ;/i> Pukulan tengah ini dibuat dari baja berkualitas tinggi yang tahan lama dengan chrome tambat. Tips tersebut diperkeras menjadi 57-60 HR untuk memastikan presisi, ketahanan, dan kinerja tinggi. ;i>Apa dimensi dari pukulan ini? ;/i> pukulan pusat Facom 257.G 140 mm. Diameter Schank adalah 16mm dan diameter tip adalah 3,5mm. ;i>Apakah ini pukulan pin otomatis atau manual? ;/i> Ini adalah pukulan otomatis dengan kekuatan yang dapat disesuaikan.
1 produk ditemukan
JPY: 8,990
USD: 56.35
-
RS PRO Menggulirkan Pemasok 2.5; 3; 3,5; 4; 4,5; 5mm 445-8841
Punch tang. Rusuk bergulir untuk membuat lubang dalam bahan bakar atau produk kulit 6 ukuran lubang pada satu alat (2.5, 3.0, 3.5, 4.0, 4.5, 5.0 mm) Indeks kantung dan kunci dalam posisi Diproduksi dari baja berlapis nikel dengan PVC meliputi alat Kunci yang ditutup saat tidak digunakan
1 produk ditemukan
JPY: 2,570
USD: 16.11
-
RS Pro 10 mm Punch, 120 mm 467-6623
DIN 7250. Pusat Punch, DIN 7250. Tusukan Octagonal jatuh, dicat emas. Pukulan tengah yang dibuat dari baja krom-vanadium. Multi-lapisan dampak kepala hampir mengeluarkan potongan dan pembengkakan.
1 produk ditemukan
JPY: 900
USD: 5.64
-
RS PRO 10 mm 467-6639
DIN 7254; DIN 7255; DIN 7256. Chisel, individu. Pipi berwarna perak mengibarkan cengkeraman Octagonal, dicat emas. Chisels terbuat dari krome-vanadium baja yang mengeras udara. Multi-lapisan dampak kepala hampir mengeluarkan potongan dan pembengkakan.
1 produk ditemukan
JPY: 1,430
USD: 8.96
-
RS Pro 200g 707-3011
Palu Tack Magnetik. Gagang baja Hickory berbahan karbon tinggi
1 produk ditemukan
JPY: 6,140
USD: 38.49
-
RS PRO 251-463
Sledge Hammer
7lb (3.17kg) general purpose heavy duty for builders and contractors Both striking faces are precision ground, especially hardened & heat-treated to withstand the highest impact Fitted with a 30in Hickory handle1 produk ditemukan
JPY: 19,000
USD: 119.10
-
RS PRO 5mm x 27 Bagian Melampirkan Set Pukulan, (&, Surat: A → Z) 251-687
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 9,850
USD: 61.74
-
RS PRO 6mm x 27 Set Pukulan, (&, Huruf: A → Z) 251-693
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 13,600
USD: 85.25
-
RS PRO 4mm x 9 Set Pukulan, (0 → 8) 251-700
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 2,910
USD: 18.24
-
RS PRO 1/8 dalam x 113 Set Pukulan, (Kosong (x12), Holder, Individu Punches (x100) 251-716
Fount Punch Set
A set of 100 alpha-numeric characters (3 mm height) made from high quality hardened tool steel (characters hardened to 58-62 Rockwell C) to give clear, consistent marking throughout a long life1 produk ditemukan
JPY: 209,000
USD: 1,310.10
-
RS PRO 2.5mm x 27 Set Pukulan, (&, Huruf: A → Z) 251-722
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 8,540
USD: 53.53
-
RS PRO 3mm x 27 Set Pukulan, (&, Huruf: A → Z) 251-738
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 8,300
USD: 52.03
-
RS PRO 8mm x 27 Bagian Melampirkan Set Pukulan, (&, Surat: A → Z) 251-744
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 18,200
USD: 114.09
-
RS PRO 2.5mm x 9 Set Pukulan, (0 → 9) 251-766
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 2,790
USD: 17.49
-
RS PRO 3mm x 9 Set Pukulan, (0 → 9) 251-772
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 2,790
USD: 17.49
-
RS PRO 6mm x 9 Set Pukulan, (0 → 9) 251-788
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 4,430
USD: 27.77
-
RS PRO 8mm x 9 Set Pukulan, (0 → 9) 251-794
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 5,950
USD: 37.30
-
RS PRO 4mm x 27 Set Pujian yang Meliputi, (&, Huruf: A → Z) 251-801
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 produk ditemukan
JPY: 8,300
USD: 52.03
-
RS PRO Angled; Skrip Tip Tungsten 394-184
Tungsten Carbide
Engineered pattern straight or straight/angle-tipped scribe with carbide tip. The tungsten carbide tipped scribe is suitable for use in hard and abrasive materials, such as stainless steel, anodized aluminum, ceramic, and glass, where the sharpness of a typical HSS scribe can rapidly become dull.1 produk ditemukan
JPY: 3,350
USD: 21.00
-
Skrip Tip Karbide Tungsten Lurus 394-194
Stretchable Sharp Tip
Polished sharp double tip angle for precision work Stretchable spring road carbide scribe core scribe length adjustable (internally adjustable) High quality pen-style machined aluminum body pocket clip1 produk ditemukan
JPY: 24,800
USD: 155.46
-
RS PRO Angled; Skrip Aluminium Lurus 394-201
Steel Scribe
Both of the scribe tips are hardened and resistant. Standard scribe with only one straight tip and double end scribe with one straight and one 90 ° curved tip are available. The scribe comes with a protective sleeve at the tip. Standard: Length 150, Diameter 4.3, Double End: Length 180, Diameter 6.51 produk ditemukan
JPY: 3,030
USD: 18.99
-
RS PRO Lurus Steel Scribe 394-207
Steel Scribe
Both of the scribe tips are hardened and resistant. Standard scribe with only one straight tip and double end scribe with one straight and one 90 ° curved tip are available. The scribe comes with a protective sleeve at the tip. Standard: Length 150, Diameter 4.3, Double End: Length 180, Diameter 6.51 produk ditemukan
JPY: 1,280
USD: 8.02
-
Set Paket Pin Paralel RS PRO 5 484-748
DIN 6450
5-Piece Set of Pin Punches1 produk ditemukan
JPY: 17,400
USD: 109.07
-
RS PRO Steel Claw Hammer, 567 g 537-007
Fibreglass Shaft Claw Hammer
20oz (570g) fibreglass shafted quality claw hammer with drop forged hardened and tempered steel head Fibreglass shafts aid in absorbing the shock vibrations, reducing user fatigue and offer high strength characteristics, being virtually unbreakable Fitted with a black rubber grip moulded directly onto the shaft1 produk ditemukan
JPY: 5,030
USD: 31.53
-
RS PRO Tembaga; Mallet Rawhide 1.1 kg 539-097
Copper & Skin Double-ended Hammer
The head of the hammer is malleable cast iron, one side is made of copper, the other side is lined with highly compressed cow skin, and the handle is made of oblong ash wood. It can give a reliable and strong impact on the copper side, and the hard but elastic impact on the cow skin side, leaving no scar on the finish.1 produk ditemukan
JPY: 8,960
USD: 56.17
-
RS PRO Polyethylene Mallet 320.0g 539-110
Plastic Hammer
Thorex Super Plastic Hammer The head made of polypropylene with a very high molecular weight is attached to the handle of ash wood. The head, which does not crack or peel, is secured safely with spark-resistant wooden and brass wedges. Durability and high wear resistance for very high impact strength Perfect for the manufacturing, service, and assembly industries where the hammer's striking surface does not change color and leaves no trace1 produk ditemukan
JPY: 4,840
USD: 30.34
-
RS PRO Nylon Mallet 450.0g Dengan Wajah Yang Dapat Diganti 547-852
Soft Face Hammer
A soft face hammer that can deliver a strong blow without compromising material (such as polished or treated surfaces during assembly of panels or equipment) Two screw-on nylon faces with cellulose ash handles in all sizes Attached chrome-plated zinc head knurls prevent loosening of the face during use The nylon face is highly waterproof and resistant to embrittlement and harsh handling during blows. On the other side is a grey soft PVC face that is highly elastic and shock absorbent and can be used for more delicate and fragile parts.1 produk ditemukan
JPY: 4,840
USD: 30.34
-
Wajah Mallet Pengganti RS PRO Nylon 547-868
Soft Face Hammer
A soft face hammer that can deliver a strong blow without compromising material (such as polished or treated surfaces during assembly of panels or equipment) Two screw-on nylon faces with cellulose ash handles in all sizes Attached chrome-plated zinc head knurls prevent loosening of the face during use The nylon face is highly waterproof and resistant to embrittlement and harsh handling during blows. On the other side is a grey soft PVC face that is highly elastic and shock absorbent and can be used for more delicate and fragile parts.1 produk ditemukan
JPY: 1,510
USD: 9.47
-
Wajah Mallet Pengganti PVC RS PRO 547-874
Soft Face Hammer
A soft face hammer that can deliver a strong blow without compromising material (such as polished or treated surfaces during assembly of panels or equipment) Two screw-on nylon faces with cellulose ash handles in all sizes Attached chrome-plated zinc head knurls prevent loosening of the face during use The nylon face is highly waterproof and resistant to embrittlement and harsh handling during blows. On the other side is a grey soft PVC face that is highly elastic and shock absorbent and can be used for more delicate and fragile parts.1 produk ditemukan
JPY: 1,270
USD: 7.96
-
RS PRO Nylon Mallet 900.0g Dengan Wajah Yang Dapat Diganti 600-795
Recoaction-Free Hammer ・ Soft Face Hammer with Die-Cast Aluminum Alloy Shock-Absorbing Rubber Grip and Two Easily Replaceable Screw-In Nylon Faces This Head Has a Sealed Cavity Containing Fine Metal Shots, When the Hammer Accelerates Forward, It Moves to the Back of the Cavity. During Impact, the Shots Move Forward to Resist the Maximum Impact of a Hard Hit and Prevent Bounce Back This Hammer Is Designed to Transmit a Hard Hit Without Hurting the Material or the User Typical Use: Assembly/Positioning of Precision Parts, Shaping Sheet Metal
1 produk ditemukan
JPY: 9,960
USD: 62.43
-
Wajah Mallet Pengganti RS PRO Nylon 600-802
Nylon Face Hammer
Hollow head sealed hammer with built-in lead.Shock-absorbent rubber handle grip and screw-in nylon face ensure no damage to hammer surface.Replacement nylon face or even sturdier polyurethane face is available.1 produk ditemukan
JPY: 2,140
USD: 13.41
-
Wajah Mallet Pengganti Polyurethane RS PRO 600-818
Nylon Face Hammer
Hollow head sealed hammer with built-in lead.Shock-absorbent rubber handle grip and screw-in nylon face ensure no damage to hammer surface.Replacement nylon face or even sturdier polyurethane face is available.1 produk ditemukan
JPY: 2,780
USD: 17.43
-
RS PRO 6 potong Set Pin 600-896
Spring Tension Pin Punch
Each punch has been cured, resistant, and polished, and the body has been blackened and rolled.1 produk ditemukan
JPY: 7,580
USD: 47.52
