TRUSCO NAKAYAMA CORPORATION

Bagi Ukuran Pin 1.2x20 160

TRUSCO NAKAYAMA CORPORATION

Pin paralel (S45C) 2.0x8 40 potong

TRUSCO NAKAYAMA CORPORATION

Roll pin Size 2.0x10 182 potong

TRUSCO NAKAYAMA CORPORATION

Lepas pin Trivalen kromat Ukuran 4mm 120 pc

TRUSCO NAKAYAMA CORPORATION

E-2.030 pc Cincin Trivalen

TRUSCO NAKAYAMA CORPORATION

E-2.040 pc

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 2X10150　B16-0210

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 2X12100 potong　B16-0212

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 2X14100　B16-0214

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 2X16100 potong　B16-0216

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 2X20100　B16-0220

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X1080　B16-0310

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X1280　B16-0312

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X1480　B16-0314

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X1660　B16-0316

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X2060　B16-0320

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X2560　B16-0325

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 3X3050　B16-0330

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X1260 potong　B16-0412

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X1460 potong　B16-0414

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X1640 potong　B16-0416

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X2040 potong　B16-0420

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X2540 potong　B16-0425

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X3040 potong　B16-0430

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X3240 potong　B16-0432

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X3640 potong　B16-0436

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 4X4040 potong　B16-0440

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X1450　B16-0514

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X1650　B16-0516

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X2050　B16-0520

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X2540　B16-0525

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X3040　B16-0530

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X3230　B16-0532

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X3630　B16-0536

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X4030　B16-0540

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X4520　B16-0545

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 5X5020　B16-0550

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 6X2030　B16-0620

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 6X2520　B16-0625

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

Waveform spr Ring Roll pin SUS Size 6X3020　B16-0630

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)