Small Universal Magnet Berdiri 17kgf

Magnet Universal Hydraulic Berdiri 257mm 80kgf

TRUSCO NAKAYAMA CORPORATION

Pembesaran Dasar Magnet dengan Adsorpsi force (N): 8.00　TMA-80

You can fine-tune the holding direction of measuring instruments with the adjuster. (Fine range: 2 mm)
Can be used as a measuring instrument holder.

TRUSCO NAKAYAMA CORPORATION

Kekuatan Penambahan Tipe bobot Dasar Magnet (N): 8.00　TMP-80

Since the main column and post are thick, the measuring instrument can be held stably.
Can be used as a retainer for measuring instruments.

TRUSCO NAKAYAMA CORPORATION

Tipe Mini Magnet Base Adsorption force (N): 250　TMM-25

Handy type with small, light weight and 250 N suction.
Can be used as a retainer for measuring instruments.

TRUSCO NAKAYAMA CORPORATION

Basis mini tipe Magnet dari Satuan Adsorpsi Peralatan Laser (N): 200　M-A

Can be set at any angle with one touch.
The magnet section is not ON/OFF.

KANETEC CO., LTD.

Gaya Penambahan Siku Tinggi (N): 1230

NOGAJAPAN Ltd.

Tipe Moth Popular Type Base Adsorption force (N): 8.00　MB1035

Widespread magnet base without slight motion feed.

NOGAJAPAN Ltd.

Tipe Moth Popular Type Base Adsorption force (N): 8.00　MB1030

Popular magnet base with fine motion feed.

NOGAJAPAN Ltd.

Clem Type Dial Penambah penyimpan pemegang Gage (N): 8.00　PH2040

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Popeye Stands Adsorption force (N): 320　PH3100

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

Kelas Berat Clem Type Dial Gage Adsorption force (N): 1.000　PH4016

You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

NOGAJAPAN Ltd.

PH Mini Holder of Laser Equipment Adsorption force (N): 150　PH5000

This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.

KANETEC CO., LTD.

Pangkalan Borer Satuan Adsorpsi Perlengkapan Laser (N): 137

TRUSCO NAKAYAMA CORPORATION

Fungsi Kunci Kecil Dasar Magnet dengan Adsorpsi force (N): 250　TML-25

Small magnet base with lock function.
Can be used as a retainer for dial gauge, dial indicator, etc.

BIG DAISHOWA SEIKI Co., Ltd.

Pasukan Penambahan Standar Archy (N): 5.00　AM-M

It is a flexible arm stand with secure lock by the patented cam mechanism.
Since the moving part is covered with rubber, it shuts out dust.

BIG DAISHOWA SEIKI Co., Ltd.

Pasukan Penyaluran Tipe Kuat Arus (N): 1.000　ASP-M

It is a strong type that has become tough.
It is a flexible arm stand with secure lock by the patented cam mechanism.

BIG DAISHOWA SEIKI Co., Ltd.

Tipe pendek Arm Tipe Short Arm Force (N) Archy Stands: 350　AMM-M

The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.

BIG DAISHOWA SEIKI Co., Ltd.

Tipe mini standar Archy Tipe Long Arm Adsorption force (N): 350　AML-M

The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.

NOGAJAPAN Ltd.

Popeye Flex Adsorption force (N): 320　NF1021

Since the gauge's fine motion feed device is located just above the magnet, zero point alignment of the gauge can be achieved instantly without shaking.
The fine adjustment screw can be moved all around so that the gauge can be inclined in any direction by 360°.

NOGAJAPAN Ltd.

Mini Holder of Laser Equipment Adsorption force (N): 320

NOGAJAPAN Ltd.

Popeye Flex Adsorption force (N): 320

NOGAJAPAN Ltd.

LC Mini Holder of Laser Equipment Adsorption force (N): 150　LC6200

By tightening the knob in the center, the three joints are locked tightly.
A mini holder with a round shape and powerful (20kgf) small magnet.

NOGAJAPAN Ltd.

DG Holder of Laser Equipment Dual COMPtment adsorption force (N): 8.00　DG6160

By tightening the knob in the center, the three joints are locked tightly.
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.

NOGAJAPAN Ltd.

Kelas Berat Badan Penanggulangan Gage (N): 8.00　MG61003

By tightening the knob in the center, the three joints are locked tightly.
The tip fine adjustment mechanism makes zero point alignment easy.

NOGAJAPAN Ltd.

Kelas Berat Pemegang Gage Holder of Laser Equipment force (N): 8.00　MG10503

Since the one-touch hand fine motion feed mechanism is attached just above the magnet, the zero point alignment of the gauge can be made instantly without touching the arm.
The arm joint type holder tightens the knob in the center to firmly lock the three joints.

NOGAJAPAN Ltd.

Botol Adsorption force (N): 13.00　MA61003

The tip fine adjustment mechanism makes zero point alignment easy.
By tightening the knob in the center, the three joints are locked tightly.

TRUSCO NAKAYAMA CORPORATION

TBC-80

TRUSCO NAKAYAMA CORPORATION

TM L-25 untuk mini rocka

Shinwa Rules Co., Ltd.

Magnet Berdiri Tipe Standar

Shinwa Rules Co., Ltd.

Magnet kolom utama berdiri untuk A dan A-2

KANETEC CO., LTD.

Magnet Vice　MPV4

Width (mm): 170
Depth (mm): 110

NOGAJAPAN Ltd.

Tipe penyesuaian ganda MG Holder of Laser Perlengkapan　MG6161

Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.

NOGAJAPAN Ltd.

Jenis penyesuaian ganda NF Holder of Laser Perlengkapan　NF6160

Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.

KANETEC CO., LTD.

Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 160 N　MB-CX-V

Adsorption force (N): 160
Magnet Width (mm): 28

KANETEC CO., LTD.

Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 300 N　MB-PSX-V

Adsorption force (N): 300
Magnet Width (mm): 30

KANETEC CO., LTD.

Magnet Base　MBS12B

Quantity: 1 Piece
Adsorption force (N): 250

KANETEC CO., LTD.

Flexible nozzle Holder　NHM1

Quantity: 1 unit
Adsorption force (N): 245

Mitutoyo Corporation

Individu Steel Gage Blok BM1 61736-04

KANETEC CO., LTD.

Basis Magnet　MB-A2

Since two arms are provided for one base, it takes no space to install the base when performing simultaneous measurement of two points.
Mounting holes are also provided on the side of the base for various measurements.