Snap-on Tools Japan K.K.

Ukuran sekrup TOP Corporation Cloth Lembar: 3/8 24 rentang penyesuaian (inci): 0,001,Red jumbo

Snap-on Tools Japan K.K.

Pilot Integral Penghitung Efek Diameter Pedang (inci): 3/32 Jumlah pedang: 3

Snap-on Tools Japan K.K.

Pilot Integral Penghitung Sink Menyetel 3/32, 1/8, 5/32, 3/16　ATI420D-4PC

NATO stock number.
High concentric quality achieved by carving.

TRUSCO NAKAYAMA CORPORATION

Nice Men G Titanium coating Effective Blade diameter: 15 Diameter Pecah: 6

Sudut ujung Sink Ti Coat: Diameter 90 Kode Efektif: 6,3

TRUSCO NAKAYAMA CORPORATION

Kontra-Sink Set Ti Coat 6 menetapkan Coat Titanium berbahan Φ6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCSC

High Speed Steel is used as the base material and has excellent wear and heat resistance.
Surface hardness is high by surface titanium coating treatment, and heat and wear resistance and sharpness are improved compared with high speed.

TRUSCO NAKAYAMA CORPORATION

Penghitung Sink manual Handle untuk 8mm

Walter Japan KK

Sudut ujung Sink Ti Coat: Diameter 90 Kode Efektif: 6,3

NOGAJAPAN Ltd.

Penghitung Sink Menetapkan 3 sudut tip lapisan Ti: 90 Φ6.3, Φ10.4, Φ16.5, Φ20.5, Φ25.0　CJ5154T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

NOGAJAPAN Ltd.

Penghitung Sink Menetapkan 3 sudut tip lapisan Ti: 90 Φ6.3, Φ8.3, Φ10.4, Φ12.4, Φ16.5, Φ20.5　CJ6152T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

ILIX Prazisionswerkzeuge GmbH

Penghitung Sink 4 set dari DLC Φ16.5, 20.5, 25.0, 37.0　6277-LSDC

Excellent adhesion prevention and low friction characteristic of DLC (Diamond-Like Carbon Coat) allows for excellent efficiency and finish surface processing.
Work Material: Aluminum Alloy/Copper Alloy.

Walter Japan KK

Sudut ujung Penghitung Sink: Diameter 90 Kode Efektif: 4,3

TRUSCO NAKAYAMA CORPORATION

Sudut ujung Sink Cobalt HSS: Diameter 90 Kode Efektif: 6,3

TRUSCO NAKAYAMA CORPORATION

Penghitung Sink Cobalt HSS Set 6 menetapkan Φ6.3, 8.3, 10,4, 12,4, 16,5, 20,5　TSCS

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, the cutting powder is well drained and the finish is beautiful.

NOGAJAPAN Ltd.

Sudut ujung kotak Sink Cobalt HSS 3: Diameter 90 Kode Efektif: 6,3

NOGAJAPAN Ltd.

Sudut Ujung Sink 3 Penghitung Bawaan: Diameter 90 Kode Efektif: 6,3

ONISHI MANUFACTURING Co., Ltd.

Heksak Penggali Sumbu Heksa dalam Drill Groove dengan panjang 15 Diameter Kode Efektif: 9,0

ONISHI MANUFACTURING Co., Ltd.

Telusuri Paling Ringkas hanya di Gali (L 15mm) 3.0mm

STAR-M Corporation

Sudut ujung Cutter chamfer: 90 Diameter Blade Efektif: 6

YAMAWA MFG. Co., Ltd.

Sudut ujung Penghitung Sink (HSS): 90 Diameter Blade Efektif: 6

RUKO

Sudut Tips Non-Blok Penghitung Skala Tinggi Hex: Diameter 90 Kode Efektif: 6,3

RUKO

Sudut Tips Jubah Merah Penghitung Sink Ti Jubah: Diameter 90 Kode Efektif: 6,3

Fukudaseiko

Tengah Mengganti nama sudut SKH51: 60 Diameter Blade Efektif: 6

Walter Japan KK

DIN 6535 HA adaptor AK610,Z12,E12,022

Walter Japan KK

HSS perusuh E681812,5

Walter Japan KK

HSS penunggang E6819 TIN10

Walter Japan KK

HSS perusuh E781816

RUKO

Penghitung Sink "lembaran cepat" Aluminium Titanium 19.0mm

RUKO

Penghitung Sink "lembar cepat" 23.0mm

MAPAL KK

MEGA-Countersink (CDS110) tidak sama dengan menit% 3 blades　COS110-0630-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) tidak sama dengan menit% 3 blades　COS110-1040-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) tidak sama dengan menit% 3 blades　COS110-1650-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) tidak sama dengan menit% 3 blades　COS110-2050-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) tidak sama dengan menit% 3 blades　COS110-2500-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink (CDS110) tidak sama dengan menit% 3 blades　COS110-6.3-25-335C-SP345-SET

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

TRUSCO NAKAYAMA CORPORATION

Penghitung Sink Cobalt HSS 4.3 mm　TCS43

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, it has a beautiful finish with good powder removal.

TRUSCO NAKAYAMA CORPORATION

Penghitung Titanium nitrat nitrida Alumina dilapisi 10,4mm　TCSA104

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

Penghitung Sink Titanium nitrida alumina dilapisi 12.4mm　TCSA124

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

Penghitung Sink Titanium nitrida alumina dilapisi 16,5mm　TCSA165

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

Penghitung Sink Titanium nitrida Alumina dilapisi 20,5mm　TCSA205

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.