[okutanikanaami] Semua Produk
Alat & Persediaan Kantor Pabrik
-
Peralatan Pemrosesan Produksi
- menurut grup Produk
- menurut Produk
Urutkan berdasar:
-
Aluminium Dapat Diperluas Metal 0.5 Tx 3.1/LW6 1000 EX-AL-T0.5SW3.1LW6-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 15,476
USD: 97.01
-
Aluminium Metal Perluasan 0,5 Tx SW4/LW8 1000 x 1 EX-AL-T0.5SW4LW8-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 15,279
USD: 95.78
-
Aluminium Dapat Diperluas Metal 0.8 Tx 10/LW 20 1000 EX-AL-T0.8SW10LW20-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 13,493
USD: 84.58
-
Aluminium Metal Perluasan 0,8 Tx SW7/LW 14 1000 x EX-AL-T0.8SW7LW14-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 13,096
USD: 82.09
-
Aluminium Dapat Diperluas Metal 1.5 Tx 16/LW 32 1000 EX-AL-T1.5SW16LW32-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 15,874
USD: 99.51
-
Logam Perluasan Baja 0,8 Tx 7/LW 12,7914 x 9 EX-SS-T0.8SW7LW12.7-914X914
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 6,151
USD: 38.56
-
Besi Metal Perluasan 0,8 Tx SW7/LW 14 914 x 914 EX-SS-T0.8SW7LW14-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 6,151
USD: 38.56
-
XG-22 914 x 914 EX-SS-XG22-T6-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 16,469
USD: 103.24
-
XG-31 914 x 914 EX-SS-XS31-T1.2-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 6,549
USD: 41.05
-
XG-32 914 x 914 EX-SS-XS32-T1.6-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 7,540
USD: 47.26
-
XG-33 914 x 914 EX-SS-XS33-T2.3-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 10,914
USD: 68.41
-
XG-41 914 x 914 EX-SS-XS41-T1.6-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 6,350
USD: 39.80
-
XG-42 914 x 914 EX-SS-XS42-T2.3-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 6,945
USD: 43.53
-
XG-43 914 x 914 EX-SS-XS43-T3.2-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 10,516
USD: 65.92
-
XG-63 914 x 914 EX-SS-XS63-T4.5-914X914
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
The opening ratio is higher than other floor steel sheets, so ventilation, lighting and visibility are better.1 produk ditemukan
JPY: 11,310
USD: 70.90
-
Logam Perluasan Baja Tak Bernilai 0,5 Tx 4/LW8 1000 EX-SUS-T0.5SW4LW8-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 21,429
USD: 134.33
-
Logam Perluasan Baja Stenless 0,8 Tx 10/LW 20 10 EX-SUS-T0.8SW10LW20-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 16,866
USD: 105.72
-
Logam Perluasan Baja Stenless Steel 0.8 Tx 7/LW 14 100 EX-SUS-T0.8SW7LW14-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 20,635
USD: 129.35
-
Logam Perluasan Baja 1.0 Tx 10/LW 20 10 EX-SUS-T1.0SW10LW20-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 19,644
USD: 123.14
-
Logam Perluasan Baja 1.0 Tx 7/LW 14 100 EX-SUS-T1.0SW7LW14-1000X1000
Expanded metal is a product in which a metal plate is cut in a staggered shape by a special machine and pushed open at the same time to form a diamond or tortoise-shell mesh.
Since it is made from a single plate, it is strong and there is no need to worry about tangling or fraying the mesh.1 produk ditemukan
JPY: 24,208
USD: 151.75
-
Perforated Resin Plate 1.0T x Square Hole 20 × P23 910 x 910 Hitam JP-PVC-T1S20P23-910X910/BLK
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 18,055
USD: 113.18
-
Perforated Resin Plate 1.0T x Square Hole 20 × P23 910 x 910 Gray JP-PVC-T1S20P23-910X910/GRY
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 18,055
USD: 113.18
-
Perforated Resin Plate 1.0T x Square Hole 20 × P23 910 x 910 Kuning JP-PVC-T1S20P23-910X910/YEL
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 18,451
USD: 115.66
-
Perforated Resin Plate 2.0T x Square Hole 20 × P23 910 x 910 Hitam JP-PVC-T2S20P23-910X910/BLK
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 22,024
USD: 138.06
-
Perforated Resin Plate 2.0T x Square Hole 20 × P23 910 x 910 Gray JP-PVC-T2S20P23-910X910/GRY
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 22,024
USD: 138.06
-
Perforated Resin Plate 3.0T x Square Hole 20 × P23 910 x 910 Hitam JP-PVC-T3S20P23-910X910/BLK
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 26,389
USD: 165.42
-
Perforated Resin Plate 3.0T x Square Hole 20 × P23 910 x 910 Gray JP-PVC-T3S20P23-910X910/GRY
It is lighter than conventional metal punching metal, but the weather resistance is inferior. In particular, deformation, discoloration and deterioration may occur when used outdoors.
It is used for design materials such as building and structural design, partitions, filters, panels, and many other situations.1 produk ditemukan
JPY: 25,595
USD: 160.44
-
Baja Tanpa Stainless Punching Metal 1.0TX○+1010 X 1000 PM-SUS-T1.00+-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 30,159
USD: 189.05
-
Stainless Steel Punching Metal 1.0T × D10 × P15 1000 x PM-SUS-T1.0D10P15-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 32,938
USD: 206.47
-
Stainless Steel Punching Metal 1.0T × D1 × P2 1000 x 10 PM-SUS-T1.0D1P2-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 69,843
USD: 437.81
-
Stainless Steel Punching Metal 1.0T × D2 × P3 1000 x 10 PM-SUS-T1.0D2P3-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 35,516
USD: 222.63
-
Alkohol Punching Metal 1.0T × D10 × P15 1000 x 10 PM-AL-T1.0D10P15-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 16,668
USD: 104.48
-
Alkohol Punching Metal 1.0T × D3 × P5 1000 x 1000 PM-AL-T1.0D3P5-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 16,668
USD: 104.48
-
Alkohol Punching Metal 1.0T × D5 × P8 1000 x 1000 PM-AL-T1.0D5P8-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 16,668
USD: 104.48
-
Aldot Metal 1.0T × D6 × P89100 x 1000 PM-AL-T1.0D6P9-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 16,668
USD: 104.48
-
Alkohol Punching Metal 1.5T × D10 × P15 1000 x 10 PM-AL-T1.5D10P15-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 21,628
USD: 135.57
-
Alkohol Punching Metal 1.5T × D3 × P5 1000 x 1000 PM-AL-T1.5D3P5-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 21,628
USD: 135.57
-
Aluminium Punching Metal 1.5T × D5 × P8 x 1000 x 1000 PM-AL-T1.5D5P8-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 21,628
USD: 135.57
-
Aluminium Punching Metal 1.5T × D6 × P9 1000 x 1000 PM-AL-T1.5D6P9-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 21,628
USD: 135.57
-
Aluminium Punching Metal 1.5T × D8 x 12 1000 x 100 PM-AL-T1.5D8P12-1000X1000
Punching metal is the name of a plate that has been processed with a punching press mold.
Since the surface is flat, it has high durability such as abrasion resistance and does not break the eyes.1 produk ditemukan
JPY: 21,628
USD: 135.57
