MAX CO., LTD.

Apron NX 98 x 58mm　MT480-BE

Made from "Nomex (R) III" material with excellent flame retardancy. • Protects workers from hazards caused by sudden fires including high temperatures and flames.
Because of its strong and lightweight material, it can be worn as a general work wear.

MAX CO., LTD.

Potong Resistan Dan Dampak Sarung Tangan Penghancur 3D Guard (R) KV M

MAX CO., LTD.

Lengan Bendera Tutup NX Strap Tetap

MAX CO., LTD.

Sarung Tangan Rendah-Izin Mesh Glove (10 Pasangan)

MAX CO., LTD.

Sarung Tangan Dalam Untuk Bersih 13 Gage (10 Pasangan)

MAX CO., LTD.

Sarung Tangan Setengah Jari Untuk Bersih 13 Gage (10 Pasangan)　MX301EX

It is a low dust producing type using filament yarn, and high gauge is used for better fit and stretchability.
Repeatable and economical.

MAX CO., LTD.

Sarung Tangan Dalam Untuk Bersih 13 Gage, Panjang (10 Pasangan)

MAX CO., LTD.

Sarung Tangan Dalam Untuk Bersih 15 Gage (10 Pasangan)

MAX CO., LTD.

Sarung Tangan Dalam Untuk Bersih 15 Gage, Paket Bersih Panjang (10 Pasangan)

MAX CO., LTD.

Mengurangi Kesopanan Dalam Sarung Tangan 13 Gage (10 Pasangan)

MAX CO., LTD.

Sarung Tangan Ternyaman 15 Gage (10 Pasangan)

MAX CO., LTD.

Sarung Tangan Ternyaman 15 Gage·Panjang (10 Pasangan)

MAX CO., LTD.

Gantung Setengah Jari yang Nyaman 15 Gage (10 Pasangan)

MAX CO., LTD.

500 ℃ Cuplikan Panas Bahan Bakar Glove (Tipe Tiga Jari)　MZ610

High heat resistance fiber "Zylon (R)" is used on the front side and aramid fiber fuelt is used for heat insulation as an inner material for high heat resistance work.

MAX CO., LTD.

Potong Sarung Tangan Resistan (Bagian Datar/Dengan Resistansi Slip)　MZ620

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" and has a high level of cut resistance.
The flat part is anti-slip.

MAX CO., LTD.

Potong Sarung Tangan Resistan (Bagian Datar/Dengan Palm)　MZ621

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" and has a high level of cut resistance.
The flat part is reinforced with cowhide.

MAX CO., LTD.

500 ℃ Pengerat Heat Resistan Glove　MZ623

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

500 ℃ Cuplikan Panas Bahan Bakar Glove (Tipe Tiga Jari)　MZ624

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

500 ℃ Canggih Heat Resistan Glove (Long)　MZ626

It uses high-strength fibers Xylon (R) and Kevlar (R) and has high heat resistance and cutting ability.
Para-aramid fiber felt is used inside the palm as insulation.

MAX CO., LTD.

500 ℃ Penopang Panas Panas Korespondensi (Tipe Panjang, Tiga-Toed)　MZ627

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

Heat Resistan, Memotong Penutup Lengan Resistan (Merajut)　MZ680

Zylon (R) is a PBO fiber that has the highest strength and heat resistance of any existing organic fiber.
It has a flexible and flexible texture and is lightweight, so it has excellent workability.

MAX CO., LTD.

Heat Resistan, Memotong Penutup Lengan Resistan (Merajut)　MZ681

Zylon (R) is a PBO fiber that has the highest strength and heat resistance of any existing organic fiber.
It has a flexible and flexible texture and is lightweight, so it has excellent workability.

MAX CO., LTD.

Potong Sarung Tangan Resistan (Bagian Datar/Dengan Resistansi Slip)　MT700

These gloves are made of "Kevlar (R)" fiber, which provides unparalleled protection by adding strength without compromising sensitive hand movements.

MAX CO., LTD.

Potong Sarung Tangan Resistan (Bagian Datar/Dengan Palm)　MT702

These gloves are made of "Kevlar (R)" fiber, which provides unparalleled protection by adding strength without compromising sensitive hand movements.

MAX CO., LTD.

Heat Resistan Glove (300 ℃ Korespondensi)　MT715

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistan Glove (300 ℃ Korespondensi) Tipe Tiga Jari　MT716

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistan Glove (300 ℃ Korespondensi)　MT717

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistan Glove (300 ℃ Korespondensi) Tipe Tiga Jari, Panjang　MT718

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

300 ℃ Resistan Panas Korespondensi　MT719

It uses Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistan Glove For Clean room 300 ℃ CorRespondence　MT720

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Heat Resistan Glove For Clean room 300 ℃ CorRespondence　MT721

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Sarung Tangan Resistan Panas Untuk Ruang Bersih 300 Korespondensi ℃ (Panjang)　MT722

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Sarung Tangan Resistan Panas Untuk Korespondensi 300 ℃ Bersih

MAX CO., LTD.

Hemat Air Panas Untuk Korespondensi ℃ Bersih 300 (Panjang)

MAX CO., LTD.

Potong Sampul Jari Resistan　MT737-L

Cut resistant finger cover using high density knitted fabric of high-strength fiber "Dyneema (R)."
Protect your fingertips from glass pieces, box cutters, etc.

MAX CO., LTD.

Potong Sampul Jari Resistan　MT737-M

Cut resistant finger cover using high density knitted fabric of high-strength fiber "Dyneema (R)."
Protect your fingertips from glass pieces, box cutters, etc.

MAX CO., LTD.

Insulasi Panas, Reistan Panas Mitten　MT764

Aramid fibers with flame retardant function are coated with aluminum, and heat insulation material is placed in the entire intermediate layer to provide excellent heat and insulation properties.
It has a loose size which improves the feeling of wearing by three-dimensional sewing and takes into consideration the use of layered shoes.

MAX CO., LTD.

Insulasi Panas, Reistan Panas (Panjang)　MT766

Aramid fibers with flame retardant function are coated with aluminum, and heat insulation material is placed in the entire intermediate layer to provide excellent heat and insulation properties.
It has a loose size which improves the feeling of wearing by three-dimensional sewing and takes into consideration the use of layered shoes.

MAX CO., LTD.

Rakitan Sarung Tangan Untuk Barang Bersih 220 ℃ Korespondensi　MT776-CP

Gloves made of synthetic leather "Galax (R)" that can withstand temperatures of 220°C while having flexible operability.

MAX CO., LTD.

Rakitan Untuk ℃ Bersih 220 (Panjang)　MT777-CP

Gloves made of synthetic leather "Galax (R)" that can withstand temperatures of 220°C while having flexible operability.