Showa Sokki Corporation

Alih Vibro　MODEL-1500B

Small vibration monitoring switch with integrated sensor, amplifier and relay.
Alarm level can be set in the range of 1~99% at 2 alarm relay contacts.

Showa Sokki Corporation

Akselerometer Shock dan Getaran Digital　MODEL-1340B

Ultra-compact, easy-to-operate impact and vibration accelerometer.
It is very small and light, so it is convenient to carry with excellent workability.

Showa Sokki Corporation

DIGI-VIBRO Portabel Vibrometer　MODEL-1332B

Handy type portable vibrometer.
Vibration measurement is easy for anyone. Ultra-compact, simple, practical and speedy measurement.

Showa Sokki Corporation

Portable Balancer　MODEL-7102B

A strobe type field balancer that can easily measure the balance of a rotating machine.
There is an output terminal for monitoring and waveform observation and recording are possible.

Showa Sokki Corporation

DIGI-VIBRO Portabel Vibrometer (Tipe Input Besar)

Showa Sokki Corporation

Kabel rendah 1,5 juta untuk DIGI-VIBRO

Showa Sokki Corporation

Kurl Cable untuk DIGI-VIBRO　LNC-3F-CC

A curl cable that can be used for 1332B series devices other than lightweight sensor types.
When you want to use a curl cable on the 1332B.

Showa Sokki Corporation

Magnet untuk DIGI-VIBRO

Showa Sokki Corporation

L Contact Pin untuk DIGI-VIBRO

Showa Sokki Corporation

3.5 phi-BNC Output Kabel　9803-97

Output cable for 1332B.
You can output AC from the 1332B and load it into the recorder.

Showa Sokki Corporation

Perekam Vibro　9801

It can be connected to a vibrometer for easy waveform recording.
Can be recorded on a C F card and transferred to a personal computer.

Showa Sokki Corporation

Kartu CF　9803-73

A CF card for use with a vibro recorder. The vibro recorder cannot store vibration waveforms without a CF card.

Showa Sokki Corporation

Paket Baterai　9780

Battery pack used for vibro recorder.
Vibrorecorders cannot be charged without a battery pack.

Showa Sokki Corporation

Kabel Keluaran BNC-BNC　9803-95

BNC- An output cable for a vibro recorder connected by BNC.
Since it is BNC-BNC, it can be used with other products.

Showa Sokki Corporation

Kabel Output Clip-BNC　9803-96

Clip — An output cable for a vibro recorder connected by a BNC.

Showa Sokki Corporation

Konektor Konversi　BNCP-C25J

Connector for converting 10-32 to BNC.

Showa Sokki Corporation

Membawa Kasus untuk perekam video　9782

This optional special case fits the vibro recorder set perfectly.

Showa Sokki Corporation

Perangkat lunak analisis FFT　9803-90

This software enables waveform display and frequency analysis of data recorded with a Vibrorecorder or Vibroview on a personal computer.
1/3 Octave band analysis function is provided.

Showa Sokki Corporation

Sensor percepatan listrik Piezo

Showa Sokki Corporation

Vibrometer Portabel Mini　1022A

Compact and lightweight analog meter type portable vibrometer.
Vibration measurement of rotating machinery and reciprocating machinery can be accurately performed.

Showa Sokki Corporation

Magnet untuk Mini Vibro (untuk 1022A)　MG-2

Magnet that can be used for 1022 A.

Showa Sokki Corporation

Tabel Sensor Vibro (untuk 1022A)　CA2411-1

Sensor cable for use with 1022 A.

Showa Sokki Corporation

Vibrometer untuk Mini Vibro Frekuensi Rendah untuk Frekuensi Rendah　1422A

Handy size, portable low frequency vibrometer from 2Hz.
Vibrometer developed for low frequency vibration measurement.

Showa Sokki Corporation

Set Perekam Vibro (untuk 1332B)　9801-T01

1332B data recording set.
Connecting to the 1332B for easy waveform recording

Showa Sokki Corporation

Pengonversi Vibro (akselerometri)

Showa Sokki Corporation

Sensor getaran keluaran AC untuk PLC　2507

Standard cable is 3 meters.
Vibration sensor specialized for PLC (programmable logic controller) connection. Outputs waveform signals of vibration acceleration with high accuracy detection.

Showa Sokki Corporation

Monitor Digital　2590C-A11

This digital vibration monitor can be combined with vibration converter 2502 series to easily measure and monitor vibration.
It receives a signal of 4~20 mA and can be scaled.

Showa Sokki Corporation

Magnet untuk Pengonversi Vibro　MG-6

Special magnet for vibro converter 2502 series.

Showa Sokki Corporation

Set Monitor Konverter Vibro (Akselerometri)

Showa Sokki Corporation

Sensor untuk PLC　9401-02

Vibration sensor amplifier developed for PLC (Pluggable Logic Controller) which aggregates IoT data.
It can be combined with various vibration sensors suitable for various applications and environments, and passes high-precision vibration waveform information to the PLC in real time.

Showa Sokki Corporation

Akselerometer dengan pengeras suara bawaan

Showa Sokki Corporation

Sensor Cable untuk sensor PLC (untuk 2470 dan 2479-9401) 5m

Showa Sokki Corporation

Output Cable untuk sensor PLC (untuk 9401)　CA2153-1

This output cable connects the 9401 inch model to the PLC.

Showa Sokki Corporation

Portable Shaker untuk kalibrasi　8100

It is a vibrator for easily calibrating vibration sensors and vibration meters in the field.
The vibrator, oscillator and vibrometer are compactly integrated.

Showa Sokki Corporation

Alat Pengukuran Getaran untuk lift　6601

Vibration measurement equipment conforming to ISO's elevator diagnostic standards.
This equipment is put on the elevator, and the data is acquired and analyzed by the PC.

Showa Sokki Corporation

Penyeimbang Portabel (set modifikasi satu sisi)

Showa Sokki Corporation

Kalkulator Koreksi Saldo　CAL-40

It is a small computer equipped with a special program for balance correction.
You can calculate the weight and mounting position of the balance weight simply by entering each parameter numerically according to the screen display.

Showa Sokki Corporation

Pendeteksi Getaran untuk pemantauan gempa　2702

It is a vibration detector for monitoring ground motion.
3 direction vector of XYZ The combined vibration acceleration is output at DC4-20 mA.

Showa Sokki Corporation

［Dihentikan］Set Monitor Vibrasi monitor gempa　MODEL2702D1

3 direction vector of XYZ The combined vibration acceleration is output 4-20 mA.
Display and alarm output are performed on the digital monitor 2590B.