78-0643-21 Cutter Karbide (untuk Baja Keras, Baja Stainless) (6mm) 12 x 22mm EA819JG-112
Fitur
- k Cut is effective for excellent surface treatment and smooth finish.
- [Precautions] 1. In order for the carbide bar to exhibit the best performance, it is necessary to adjust the rotation speed to the optimum speed for the cutting object. 2.The harder the material, the lower the speed. 3.The smaller the carbide bar, the higher the rotation speed. 4.When using, move constantly and apply light pressure. 5.Use at a speed below the optimum speed will result in blade loss. 6.Using a worn-out tool or collet can lead to a missing blade. 7.Do not sink more than 1/3 of the tip length of the carbide bar. 8.If the rotation speed is too fast, the blade will wear faster.
Spec
- Shaft dia: 6mm
- Potongan berlian halus
- Blade D x Blade L x Length: 12 x 22 x 67mm
Ukuran paket：120×17×50 mm 50 g [Tentang Ukuran Paket]
| Perintah No. | 78-0643-21 | |
|---|---|---|
| Model No. | EA819JG-112 | |
| Kode JAN | 4518340075382 | |
| Harga standar |
JPY: 7,840
USD: 49.14
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
78-0643-19 | Cutter Karbide (untuk Baja Keras, Baja Stainless) (6mm) 8 x 13mm EA819JG-108 | EA819JG-108 | 1piece | JPY: 4,610 | USD: 28.90 |
|
|
 |
78-0643-20 | Pemotong Berbahan Dasar (untuk Baja Keras, Baja Stainless) (6mm) 10 x 16mm EA819JG-110 | EA819JG-110 | 1piece | JPY: 5,200 | USD: 32.60 |
|
|
 |
78-0643-21 | Cutter Karbide (untuk Baja Keras, Baja Stainless) (6mm) 12 x 22mm EA819JG-112 | EA819JG-112 | 1piece | JPY: 7,840 | USD: 49.14 |
|