78-0642-39 Pemotong Karbide Terpadu (6mm) 16 x 25mm EA819JA-16
Fitur
- Eye type/diamond: Multipurpose type. Smooth workability with high grinding force. Since the cut marks are fine, the rotation does not slow down.
- [Precautions] 1. In order for the carbide bar to exhibit the best performance, it is necessary to adjust the rotation speed to the optimum speed for the cutting object. 2.The harder the material, the lower the speed. 3.The smaller the carbide bar, the higher the rotation speed. 4.When using, move constantly and apply light pressure. 5.Use at a speed below the optimum speed will result in blade loss. 6.Using a worn-out tool or collet can lead to a missing blade. 7.Do not sink more than 1/3 of the tip length of the carbide bar. 8.If the rotation speed is too fast, the blade will wear faster.
- The d-cut (double/diamond) is a typical blade shape. It is highly cuttable and provides a beautiful finished surface.
Spec
- Shaft dia: 6mm
- Panjang Blade D x Blade L x: 16 x 25 x 70mm
Ukuran paket：22×22×113 mm 90 g [Tentang Ukuran Paket]
| Perintah No. | 78-0642-39 | |
|---|---|---|
| Model No. | EA819JA-16 | |
| Kode JAN | 4518340060234 | |
| Harga standar |
JPY: 7,540
USD: 46.91
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
78-0642-29 | Pemotong Karbide Tersemat (6mm) 4 x 16mm EA819JA-4 | EA819JA-4 | 1piece | JPY: 2,760 | USD: 17.17 |
|
|
 |
78-0642-30 | Cutter Karbide (6mm) 6 x 19mm EA819JA-6 | EA819JA-6 | 1piece | JPY: 2,760 | USD: 17.17 |
|
|
 |
78-0642-31 | Cutter Karbide (6mm) 6 x 19mm EA819JA-6B | EA819JA-6B | 1piece | JPY: 4,130 | USD: 25.70 |
|
|
 |
78-0642-32 | Pemotong Karbide Terpadu (6mm) 6 x 25mm EA819JA-6C | EA819JA-6C | 1piece | JPY: 3,970 | USD: 24.70 |
|
|
 |
78-0642-33 | Cutter Karbide (6mm) 8 x 19mm EA819JA-8 | EA819JA-8 | 1piece | JPY: 3,750 | USD: 23.33 |
|
|
 |
78-0642-34 | Cutter Karbide (6mm) 10 x 19mm EA819JA-10 | EA819JA-10 | 1piece | JPY: 3,950 | USD: 24.58 |
|
|
 |
78-0642-35 | Pemotong Karbide Terpadu (6mm) 10 x 25mm EA819JA-10B | EA819JA-10B | 1piece | JPY: 4,930 | USD: 30.67 |
|
|
 |
78-0642-36 | Pemotong Karbide Terpadu (6mm) 11 x 25mm EA819JA-11 | EA819JA-11 | 1piece | JPY: 6,040 | USD: 37.58 |
|
|
 |
78-0642-37 | Cutter Karbide (6mm) 12 x 19mm EA819JA-13 | EA819JA-13 | 1piece | JPY: 5,990 | USD: 37.27 |
|
|
 |
78-0642-38 | Pemotong Karbide Terpadu (6mm) 12 x 25mm EA819JA-13B | EA819JA-13B | 1piece | JPY: 5,990 | USD: 37.27 |
|
|
 |
78-0642-39 | Pemotong Karbide Terpadu (6mm) 16 x 25mm EA819JA-16 | EA819JA-16 | 1piece | JPY: 7,540 | USD: 46.91 |
|
