Fitur

• Single cut twisted blade.
• Since the amount of cutting is large, it can shorten the working time and is suitable for high-efficiency work.
• The discharged chips are needle-shaped.
• Cutting resistance increases slightly compared to cross cut.
• Finished surface is better than cross cut.
• Please use after confirming that there are no scratches or external abnormalities on the carbide bar.
• Mount properly, minimize the protruding length (overhang) of the shank, and chuck securely.
• Check that there is no run-out or abnormality.
• Do not force or apply excessive force during work.
• Be sure to wear safety glasses and a dust mask during work.