Fitur

• features of bite joints
• It does not require threading, welding, flaring, brazing, etc. for piping, thus reducing the number of piping man-hours.
• Since threading and welding are not required, the pipe can be made thinner (Due to the mechanism of the engagement joint and the rigidity of the pipe, the pipe wall thickness must be 10% or more of its outer diameter, and a minimum of 1 mm is required if the outer diameter is φ10 mm or less.), and since bending is easy, the total number of joints used is reduced, resulting in lighter and more compact equipment.
• Even after repeated disassembly and reassembly, a perfect connection can be reliably reproduced.
• Since it is a metal contact seal that does not use sealing materials such as O-rings, it can be used over a wide temperature range.
• Suitable joint materials such as carbon steel, stainless steel and brass can be selected according to the fluid used and the external atmosphere.
• Features of Enveloped Sleeve
• The envelope of the sleeve makes it possible to precisely center the piping, greatly reducing problems caused by misalignment, which was the main cause of oil leakage in the past.
• The slit envelope improves vibration resistance. Fatigue strength is improved by more than 20% compared to conventional NS type penetration joints. This reduces pipe damage and nut loosening caused by pipe vibration.
• Since the NS type penetration joint is compatible with the main body, remodeling and repair of existing piping is also easy.