Spec

• Liquid: A device for sucking and discharging liquid into the compression chamber.
• Bimorph: A liquid pump using two piezoelectric elements and a bimorph oscillator as a driving source.
• Pump Type: Disassembly Type
• Diaphragm Type: 100 V x 1
• Pump Housing Material: Polypropylene (PP)
• Pump Type (Duplicates): Disassembly Type
• Rubber Material (O-ring, check valve): Ethylene Propylene Rubber
• Driving Voltage (AC · V): 100
• Current consumption (mA): 15
• Self-Absorbing Force (kPa) * 1:8
• Flow rate (mL/min) * 1:350
• Discharge pressure (kPa): 18
• Used Parts: Housing/PP, Wetted Sheet/PP, Check Valve/Ethylene Propylene Rubber, O-Ring/Ethylene Propylene Rubber
• Mass (g): 130
• Appropriate chemical resistance * 2: aqueous ammonia, ethanol, dilute hydrochloric acid, caustic potassium, caustic soda, methanol
• Examples of improper chemical resistance: xylene, mineral oil, carbon tetrachloride, tricrene, toluene, benzene
• *1) The performance shown here is based on the use of 25°C water at a power supply frequency of 60 Hz. At 50 Hz, the flow rate is reduced by 20%. When the liquid becomes cold, the check valve hardens, and the flow rate and self-absorption force decrease. The flow rate of fluororubber in particular is reduced by half at 5°C, so please select with sufficient margin. Since the flow rate of viscous liquid decreases, please check with the actual machine.
• *2) Appropriate chemical resistance is for reference only. Please check under operating conditions when using.
• Conditions of use (non-freezing and non-condensing)
• Operating Ambient Temperature: 5~50°C
• *The operating ambient temperature of 5~50°C can be used at 50/60Hz. If the frequency is increased, the temperature inside the pump will rise.
• Operating ambient humidity: 35~85%
• Operating fluid temperature: 5~50°C
•