Spec

• Socket
• SN Type (For Mounting Urethane Hose)
• Opposing Hose Size: φ6.5 x φ10
• Mass (g): 64
• Dimensions (L) (mm): (64)
• Dimensions (H) (mm): Hex 22
• Dimensions (T) (mm): Hex 17
• Dimension (φB) (mm): 5.5
• Maximum working pressure: 1.5 MPa{15kgf/cm2}
• Valve structure: One-way switching type
• Applicable Fluid: Air
• Body Material: Aluminum Alloy
• Withstand Pressure: 2.0 MPa{20kgf/cm2}
• Seal Material: Nitrile Rubber (NBR)
• Standard Material
• Operating temperature range *: -20 to +60°C
• *The available temperature range depends on the operating conditions.
• Recommended tightening torque range: 9~11 N · m{92~112kgf · cm}
• *For urethane hose mounting, tighten the nut to the end.
• *For urethane hose mounting, it is recommended to apply mineral oil grease to the inner diameter of the nut (screw part and hose contact part) to facilitate tightening.
• Compatibility
• Can be connected to Type 10, Type 17, Type 20, Type 30 and Type 40 of "High Coupler."
• These connectors can be used with products from the "High Coupler" and "Nut Coupler" series.
• *Some resin plugs (High Coupler 250 (discontinued)) are not compatible.
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
•