69-5994-76 Bushing for Mitsuboshi Belt Maxter Wedge Pulley 75 mm Shape U0 Type Type 1 U0-75N-JIS
Fitur
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
Spec
- Shape: U0
- Type: Type 1
- Shaft Hole Diameter (mm): 75
- Key Dimensions (mm): 20 x 12
- L(mm):125.4
- U(mm):19.1
- T(mm):106.3
- D (mm) Large Diameter: 152.4
- D (mm) Small Diameter: 146.45
- H(mm):212.5
- V(mm):117.8
- W(mm):32
- X(mm):95.2
- Y(mm):11.1
- R(mm):11.1
- S(mm):10
- Number of bolts: 3
- Bolt Size: M16 x 65
- Approximate mass (kg): 12
| Perintah No. | 69-5994-76 | |
|---|---|---|
| Model No. | U0-75N-JIS | |
| Harga standar |
JPY: 107,450
USD: 674.01
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-5994-70 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 100 mm Shape U0 Type Type 1 U0-100N-JIS | U0-100N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-71 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 110 mm Shape U0 Type Type 2 U0-110N-JIS | U0-110N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-72 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 120 mm Shape U0 Type Type 2 U0-120N-JIS | U0-120N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-73 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 125 mm Shape U0 Type Type 2 U0-125N-JIS | U0-125N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-74 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 130 mm Shape U0 Type Type 2 U0-130N-JIS | U0-130N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-75 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 70 mm Shape U0 Type Type 1 U0-70N-JIS | U0-70N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-76 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 75 mm Shape U0 Type Type 1 U0-75N-JIS | U0-75N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-77 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 80 mm Shape U0 Type Type 1 U0-80N-JIS | U0-80N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-78 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 85 mm Shape U0 Type Type 1 U0-85N-JIS | U0-85N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-79 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 90 mm Shape U0 Type Type 1 U0-90N-JIS | U0-90N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|
|
 |
69-5994-80 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley 95 mm Shape U0 Type Type 1 U0-95N-JIS | U0-95N-JIS | 1piece | JPY: 107,450 | USD: 674.01 |
|