69-5987-83 Bushing Shape S1 Type Type 1 for Mitsuboshi Belt Maxter Wedge Pulley S1-65N-JIS
Fitur
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
Spec
- Shape: S1
- Type: Type 1
- Shaft Hole Diameter (mm): 65
- Key Dimensions (mm): 18 x 11
- L(mm):111.1
- U(mm):19.1
- T(mm):92
- D (mm) Large Diameter: 117.425
- D (mm) Small Diameter: 112.219
- H(mm):161.7
- V(mm):136.5
- W(mm):20
- X(mm):84.1
- Y(mm):7.9
- R(mm):7.9
- S(mm):8
- Number of bolts: 3
- Bolt Size: M12 x 50
- Approximate mass (kg): 6.1
| Perintah No. | 69-5987-83 | |
|---|---|---|
| Model No. | S1-65N-JIS | |
| Harga standar |
JPY: 49,090
USD: 305.44
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-5987-82 | Bushing Shape S1 Type Type 1 for Mitsuboshi Belt Maxter Wedge Pulley S1-60N-JIS | S1-60N-JIS | 1piece | JPY: 49,090 | USD: 305.44 |
|
|
 |
69-5987-83 | Bushing Shape S1 Type Type 1 for Mitsuboshi Belt Maxter Wedge Pulley S1-65N-JIS | S1-65N-JIS | 1piece | JPY: 49,090 | USD: 305.44 |
|
|
 |
69-5987-84 | Bushing Shape S1 Type Type 1 for Mitsuboshi Belt Maxter Wedge Pulley S1-70N-JIS | S1-70N-JIS | 1piece | JPY: 49,090 | USD: 305.44 |
|