Fitur

• features of bite joints
• It does not require threading, welding, flaring, brazing, etc. for piping, thus reducing the number of piping man-hours.
• Because no threading or welding is required, the pipe can be made thinner (Due to the mechanism of the engagement joint and the rigidity of the pipe, the pipe wall thickness must be 10% or more of its outer diameter, and a minimum of 1 mm is required if the outer diameter is φ10 mm or less.), and bending is easy, so the total number of joints used is reduced and equipment is lighter.
• It can be made compact.
• disassembly
• Repeated reassembly ensures a perfect connection.
• Since it is a metal contact seal that does not use sealing materials such as O-rings, it can be used over a wide temperature range.
• working fluid
• Carbon steel
• stainless steel
• You can choose a suitable fitting material such as brass.
• Features of Enveloped Sleeve
• The envelope of the sleeve makes it possible to precisely center the piping, greatly reducing problems caused by misalignment, which was the main cause of oil leakage in the past.
• The slit envelope improves vibration resistance. Fatigue strength is improved by more than 20% compared to conventional NS type penetration joints. This reduces pipe damage and nut loosening caused by pipe vibration.
• Since the NS type insertion joint is compatible with the main body, it is possible to modify existing piping.
• It is also easy to repair.