Fitur

• Utilizing the texture of concrete, the vitreous reinforced layer suppresses dirt and deterioration.
• It penetrates the concrete surface and forms a vitreous reinforcing layer, and has excellent effects in improving abrasion resistance and preventing deterioration and dust.
• Creates a chic and glossy concrete surface.
• Prevents neutralization of concrete due to acid rain.
• Clean up with water and easy to handle.
• Prevents the generation of white dust peculiar to concrete.
• Suitable for strengthening unpainted and uncolored parts of concrete, mortar and slate (not admixture).
• [How to use]
• ① Remove dust, oil, and sludge from the surface to apply, and dry thoroughly. If painted, remove the coating completely.
• ② If the surface is brittle due to weathering, remove the brittle surface by polishing with a wire brush or sandpaper.
• ③ If there are bubble holes on the surface, repair with mortar and dry beforehand.
• ④ Cover areas where this product may cause damage with newspaper, masking tape, etc.
• ⑤ Paint with roller brush (for all-purpose use) and brush (for water-based use). (Bleeding may occur under the masking tape.)
• ⑥ Shake the container well and stir the contents well, then transfer the necessary amount to a container with a wide opening and use as it is without diluting.
• ⑦ Test the product on an inconspicuous area, check the dryness and effect on the base, and confirm that there are no abnormalities before applying.
• ⑧ Don't apply a thick coat at once, and apply the second coat when the surface is dry. Make it as thin as possible for the second time, and apply more on the areas where you breathe in a lot.
• ⑨ If you apply too much, the ingredients will remain on the surface, causing sliminess and stains. If you apply too much, rinse thoroughly with water after drying.
• ⑩ Wash the equipment thoroughly with water after use.