65-4239-23 Meter Screw Plug Gauge Coarse Screw Diameter 24 mm Pitch 3 mm GPWP224-3.0
Fitur
- Conventional JIS System JISB0205 (Old Standard)/0207 (Old Standard)
- The most common gauge for parallel threads is the limit type.
- This gauge is called the limit thread gauge because it is checked at the upper and lower limits of the predetermined dimensional accuracy of the threaded part by a thread with two dimensional differences of the pass-through.
Spec
- Type: Stop (for work)
- Grade: Grade 2
- Thread Diameter: 24
- Pitch: 3.0
- Peak Angle: 60°
| Perintah No. | 65-4239-23 | |
|---|---|---|
| Model No. | GPWP224-3.0 | |
| Harga standar |
JPY: 37,070
USD: 232.37
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-4239-19 | Meter Screw Plug Gauge Screw Diameter 24 mm Pitch 0.5 mm GPWP224-0.5 | GPWP224-0.5 | 1piece | JPY: 75,640 | USD: 474.14 |
|
|
 |
65-4239-20 | Meter Screw Plug Gauge Screw Diameter 24 mm Pitch 1 mm GPWP224-1.0 | GPWP224-1.0 | 1piece | JPY: 44,620 | USD: 279.70 |
|
|
 |
65-4239-21 | Meter Screw Plug Gauge Screw Diameter 24 mm Pitch 1.5 mm GPWP224-1.5 | GPWP224-1.5 | 1piece | JPY: 32,430 | USD: 203.29 |
|
|
 |
65-4239-22 | Meter Screw Plug Gauge Screw Diameter 24 mm Pitch 2 mm GPWP224-2.0 | GPWP224-2.0 | 1piece | JPY: 32,430 | USD: 203.29 |
|
|
 |
65-4239-23 | Meter Screw Plug Gauge Coarse Screw Diameter 24 mm Pitch 3 mm GPWP224-3.0 | GPWP224-3.0 | 1piece | JPY: 37,070 | USD: 232.37 |
|