65-4238-83 Meter Screw Plug Gauge Coarse Screw Diameter 14 mm Pitch 2 mm GPWP214-2.0
Fitur
- Conventional JIS System JISB0205 (Old Standard)/0207 (Old Standard)
- The most common gauge for parallel threads is the limit type.
- This gauge is called the limit thread gauge because it is checked at the upper and lower limits of the predetermined dimensional accuracy of the threaded part by a thread with two dimensional differences of the pass-through.
Spec
- Type: Stop (for work)
- Grade: Grade 2
- Thread Diameter: 14
- Pitch: 2.0
- Peak Angle: 60°
| Perintah No. | 65-4238-83 | |
|---|---|---|
| Model No. | GPWP214-2.0 | |
| Harga standar |
JPY: 32,560
USD: 204.24
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
65-4238-79 | Meter Screw Plug Gauge Screw Diameter 14 mm Pitch 0.5 mm GPWP214-0.5 | GPWP214-0.5 | 1piece | JPY: 66,950 | USD: 419.96 |
|
|
![]() |
65-4238-80 | Meter Screw Plug Gauge Screw Diameter 14 mm Pitch 1 mm GPWP214-1.0 | GPWP214-1.0 | 1piece | JPY: 33,460 | USD: 209.89 |
|
|
![]() |
65-4238-81 | Meter Screw Plug Gauge Screw Diameter 14 mm Pitch 1.25 mm GPWP214-1.25 | GPWP214-1.25 | 1piece | JPY: 35,150 | USD: 220.49 |
|
|
![]() |
65-4238-82 | Meter Screw Plug Gauge Screw Diameter 14 mm Pitch 1.5 mm GPWP214-1.5 | GPWP214-1.5 | 1piece | JPY: 30,400 | USD: 190.69 |
|
|
![]() |
65-4238-83 | Meter Screw Plug Gauge Coarse Screw Diameter 14 mm Pitch 2 mm GPWP214-2.0 | GPWP214-2.0 | 1piece | JPY: 32,560 | USD: 204.24 |
|





