65-4238-64 Meter Screw Plug Gauge Screw Diameter 10 mm Pitch 1.25 mm GPWP210-1.25
Fitur
- Conventional JIS System JISB0205 (Old Standard)/0207 (Old Standard)
- The most common gauge for parallel threads is the limit type.
- This gauge is called the limit thread gauge because it is checked at the upper and lower limits of the predetermined dimensional accuracy of the threaded part by a thread with two dimensional differences of the pass-through.
Spec
- Type: Stop (for work)
- Grade: Grade 2
- Thread Diameter: 10
- Pitch: 1.25
- Peak Angle: 60°
| Perintah No. | 65-4238-64 | |
|---|---|---|
| Model No. | GPWP210-1.25 | |
| Harga standar |
JPY: 28,300
USD: 177.52
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-4238-61 | Meter Screw Plug Gauge Screw Diameter 10 mm Pitch 0.5 mm GPWP210-0.5 | GPWP210-0.5 | 1piece | JPY: 55,550 | USD: 348.45 |
|
|
 |
65-4238-62 | Meter Screw Plug Gauge Screw Diameter 10 mm Pitch 0.75 mm GPWP210-0.75 | GPWP210-0.75 | 1piece | JPY: 39,350 | USD: 246.83 |
|
|
 |
65-4238-63 | Meter Screw Plug Gauge Screw Diameter 10 mm Pitch 1 mm GPWP210-1.0 | GPWP210-1.0 | 1piece | JPY: 30,810 | USD: 193.26 |
|
|
 |
65-4238-64 | Meter Screw Plug Gauge Screw Diameter 10 mm Pitch 1.25 mm GPWP210-1.25 | GPWP210-1.25 | 1piece | JPY: 28,300 | USD: 177.52 |
|
|
 |
65-4238-65 | Meter Screw Plug Gauge Coarse Screw Diameter 10 mm Pitch 1.5 mm GPWP210-1.5 | GPWP210-1.5 | 1piece | JPY: 29,060 | USD: 182.29 |
|