65-2019-21 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 20 HTNRS4010-022028
Fitur
- 7-Flute Taper Neck Radius End Mill for Processing High-Hardness Materials.
- Cutting resistance is reduced by the corner R shape that smoothly connects from the tip to the outer periphery, and vibration is suppressed by the unequal division shape.
- Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
- Uses HARDMAX coat for long life in processing of high hardness materials.
- Compatible with all coolant.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
Spec
- Blade diameter (mm): 1
- Blade length (mm): 1
- Total length (mm): 60
- Shank diameter (mm): 4
- Corner radius (mm): R 0.2
- Effective length (mm): 1.8
- Number of blades: 4
- Helix angle: 45
- Surface treatment: HARD MAX
- Compatible Work Material: Pre-hardened Steel, Quenched Steel (55 HRC) (60 HRC) (65 HRC), Cast Iron
- Material/Finish: Super MG
- Mass: 10 g
- Country of origin: Japan
- Securities Code: 217 -8806
| Perintah No. | 65-2019-21 | |
|---|---|---|
| Model No. | HTNRS4010-022028 | |
| Kode JAN | 4560295111684 | |
| Harga standar |
JPY: 8,125
USD: 50.93
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-2019-19 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 6 HTNRS4010-020628 | HTNRS4010-020628 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
65-2019-20 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 10 HTNRS4010-021028 | HTNRS4010-021028 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
65-2019-21 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 20 HTNRS4010-022028 | HTNRS4010-022028 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
65-2019-22 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 30 HTNRS4010-023028 | HTNRS4010-023028 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
65-2019-23 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 6 HTNRS4015-030628 | HTNRS4015-030628 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
65-2019-24 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 10 HTNRS4015-031028 | HTNRS4015-031028 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
65-2019-25 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 20 HTNRS4015-032028 | HTNRS4015-032028 | 1piece | JPY: 8,125 | USD: 50.93 |
|
|
 |
65-2019-26 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 30 HTNRS4015-033028 | HTNRS4015-033028 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
65-2019-27 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.4 degrees x Blade Length 2 x Neck Length 30 HTNRS4020-053028 | HTNRS4020-053028 | 1piece | JPY: 8,938 | USD: 56.03 |
|
|
 |
65-2019-28 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.9 degrees x Blade Length 2 x Neck Length 30 HTNRS4020-053038 | HTNRS4020-053038 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
65-2019-29 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 2.9 degrees x Blade Length 2 x Neck Length 30 HTNRS4020-053058 | HTNRS4020-053058 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
65-2019-30 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.4 degrees x Blade Length 2 x Neck Length 40 HTNRS4020-054028 | HTNRS4020-054028 | 1piece | JPY: 11,375 | USD: 71.30 |
|
|
 |
65-2019-31 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.9 degrees x Blade Length 2 x Neck Length 40 HTNRS4020-054038 | HTNRS4020-054038 | 1piece | JPY: 12,188 | USD: 76.40 |
|
|
 |
65-2019-32 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 2.9 degrees x Blade Length 2 x Neck Length 42 HTNRS4020-054258 | HTNRS4020-054258 | 1piece | JPY: 13,406 | USD: 84.03 |
|
|
 |
65-2019-33 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.4 degrees x Blade Length 3 x Neck Length 30 HTNRS4030-083028 | HTNRS4030-083028 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
65-2019-34 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.9 degrees x Blade Length 3 x Neck Length 30 HTNRS4030-083038 | HTNRS4030-083038 | 1piece | JPY: 9,750 | USD: 61.12 |
|
|
 |
65-2019-35 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 2.9 degrees x Blade Length 3 x Neck Length 33 HTNRS4030-083358 | HTNRS4030-083358 | 1piece | JPY: 13,406 | USD: 84.03 |
|
|
 |
65-2019-36 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.4 degrees x Blade Length 3 x Neck Length 40 HTNRS4030-084028 | HTNRS4030-084028 | 1piece | JPY: 11,375 | USD: 71.30 |
|
|
 |
65-2019-37 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.9 degrees x Blade Length 3 x Neck Length 40 HTNRS4030-084038 | HTNRS4030-084038 | 1piece | JPY: 11,375 | USD: 71.30 |
|
|
 |
65-2019-38 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.9 degrees x Blade Length 4 x Neck Length 30 HTNRS4040-103038 | HTNRS4040-103038 | 1piece | JPY: 13,000 | USD: 81.49 |
|
|
 |
65-2019-39 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 2.9 degrees x Blade Length 4 x Neck Length 45 HTNRS4040-104558 | HTNRS4040-104558 | 1piece | JPY: 14,625 | USD: 91.68 |
|
|
 |
65-2019-40 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.4 degrees x Blade Length 4 x Neck Length 49 HTNRS4040-104928 | HTNRS4040-104928 | 1piece | JPY: 12,188 | USD: 76.40 |
|
|
 |
65-2019-41 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.4 degrees x Blade Length 4 x Neck Length 60 HTNRS4040-106028 | HTNRS4040-106028 | 1piece | JPY: 13,813 | USD: 86.59 |
|
|
 |
65-2019-42 | 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.9 degrees x Blade Length 4 x Neck Length 67 HTNRS4040-106738 | HTNRS4040-106738 | 1piece | JPY: 18,688 | USD: 117.14 |
|
|
 |
65-2019-43 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 39 HTNRS4060-153938 | HTNRS4060-153938 | 1piece | JPY: 13,813 | USD: 86.59 |
|
|
 |
65-2019-44 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 2.9 degrees x Blade Length 6 x Neck Length 47 HTNRS4060-154758 | HTNRS4060-154758 | 1piece | JPY: 18,688 | USD: 117.14 |
|
|
 |
65-2019-45 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.4 degrees x Blade Length 6 x Neck Length 51 HTNRS4060-155128 | HTNRS4060-155128 | 1piece | JPY: 13,813 | USD: 86.59 |
|
|
 |
65-2019-46 | 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69 HTNRS4060-156938 | HTNRS4060-156938 | 1piece | JPY: 19,094 | USD: 119.69 |
|