Fitur

• It is a 2-pin type 10 unit tap with an individual switch that can switch ON/OFF for each insertion port and save standby power.
• The individual switches are arranged diagonally so that they do not interfere with the connection of a large AC adaptor.
• By expanding the leg parts, the tap will not roll over easily even when a heavy AC adapter or the like is connected.
• The leg parts are equipped with a 10 mm diameter hanging hole, a 5 mm diameter screw fixing hole, and a cross shaped Dharma hole on the bottom, and can be hung or fixed to a wall with the included tapping screws.
• To make it easy to use even with a large AC adapter, the 3 consecutive units at one end are arranged so that the intermediate distance between the adjacent insertion ports is 57 mm.
• Equipped with a "dust prevention shutter" to prevent dust from entering when the plug is not inserted.
• The insertion port uses a thermosetting resin with excellent heat resistance, which is difficult to melt in the event of heat generation, and is effective in preventing electric fires.
• Equipped with elements (varistors) that absorb lightning surges of up to 12500 V (based on the JEC210/212 standard) caused by induced lightning, the devices are protected.
• * Performance will deteriorate depending on the received voltage and the number of times.
• The power cord uses a double tethered cord that conforms to the Japan Wiring System Manufacturers Association (JWDS0010), which is effective in preventing electric shock and fire caused by broken wires and tearing.
• The 2-pin type plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
• Uses a 180° swing plug for easy wiring in tight spaces.