ELECOM CO., LTD

64-9712-29 Lightning Guard Tap, Batch Switch, Magnet, Swing Plug dengan Dust Prevention Shutter 10, 3.0 m Black ECT-1530BK

Fitur

  • This is a tap equipped with a 2 pin type insertion port of 5 units each on the top and side, for a total of 10 units.
  • The insertion port is arranged in 2 sides to make it compact even though it has 10 units.
  • It has a batch switch that turns on and off all connected devices together to save standby power. When the switch is ON, it emits orange light, and you can see the ON/OFF status at a glance.
  • Ultra-strong neodymium magnets are placed on the bottom to secure it to steel furniture and office machines.
  • To prevent the connected plug from interfering with the adjacent insertion port, the insertion port center is designed with a margin of 40 mm minimum. In addition, the end of each face is placed 57 mm apart, making it easy to use even with large AC adapters.
  • It is equipped with a "dust prevention shutter" to prevent dust from entering when the plug is not inserted.
  • The insertion port uses a thermosetting resin with excellent heat resistance, which is difficult to melt in the event of heat generation, and is effective in preventing electric fires.
  • Equipped with an element (varistor) that absorbs lightning surges up to 12500 V caused by induced lightning, it protects connected equipment. (* The maximum surge voltage of 12500 V is based on the JEC210/212 standard.). The performance deteriorates depending on the voltage and the number of times received. )
  • The 2-pin type plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
  • Uses a 180° swing plug for easy wiring in tight spaces.
  • The power cord uses a double tethered cord that conforms to the Japan Wiring System Manufacturers Association (JWDS0010), which is effective in preventing electric shock and fire caused by broken wires and tearing.
  • Compact design with inlet ports on top and sides.

Spec

  • Bentuk Porta Penyisipan Badan: 2 pin
  • Nomor Port Penyisipan Badan: 10 (5/Sisi 5 Teratas)
  • Spesifikasi Colok: 2 pin
  • Panjang Kabel: 3,0 juta
  • peringkat: Hingga 125 V/15 A/1500 W
  • Sakelar: Ya (batch switch)
  • Petir: Ya
  • Pengalih tugas: ○
  • Colok dengan penutup terisolasi: ○
  • Lampu indikator daya: ○ (bagian pengubah batch)
  • Liputan ganda: ○
  • Swing plug: Ya
  • Magnet : ○
  • Memperbaiki metode: Bisa untuk sementara ditentukan oleh magnet.
  • Warna: Hitam
  • Materi: Plastik Isi/ABS, Colok/PVC, Pemasukan kembali Porta/urea
  • dimensi eksternal: Lebar 295 x Kedalaman 43 x Tinggi 32 mm
  • *Tidak termasuk bagian kabel dan bagian plug
  • Berat: sekitar 500 g
  • Wilayah yang tersedia: Jepang saja
  • Undang-Undang keselamatan dan peralatan listrik: PSE
  • Periode garansi: 1 tahun
  •  

Ukuran paket:76×46×334 mm   [Tentang Ukuran Paket]

Perintah No. 64-9712-29
Model No. ECT-1530BK
Kode JAN 4549550207805
Harga standar JPY: 5,000 USD: 31.36
Excange rate 1USD= 159.42JPY
Valid price in Japan
Kuantitas 1piece
Saham di Jepang
Saham Pemasok

Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)

Gambar produk Perintah No. Nama Model No. Kuantitas Harga standar Harga valid di Jepang Stok
[Saham Pemasok]
64-9712-29 Lightning Guard Tap, Batch Switch, Magnet, Swing Plug dengan Dust Prevention Shutter 10, 3.0 m Black ECT-1530BK ECT-1530BK 1piece JPY: 5,000 USD: 31.36

64-9712-30 Lightning Guard Tap, Batch Switch, Magnet, Swing Plug dengan Dust Prevention Shutter, 10pc, 3,0 m White ECT-1530WH ECT-1530WH 1piece JPY: 5,000 USD: 31.36

64-9712-31 Lightning Guard Tap, Batch Switch, Magnet, Swing Plug dengan Dust Prevention Shutter 10, 5,0 m Black ECT-1550BK ECT-1550BK 1piece JPY: 5,440 USD: 34.12

64-9712-32 Lightning Guard Tap, Batch Switch, Magnet, Swing Plug dengan Dust Prevention Shutter, 10pc, 5,0 m White ECT-1550WH ECT-1550WH 1piece JPY: 5,440 USD: 34.12