64-8475-45 4 Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 2.5 x Blade Length 10 x Total Length 50 x Shank Diameter 4 CXES4025-1000
Fitur
- Vibration is suppressed by unequal division and unequal lead specifications.
- By adopting a high-toughness type that is hard to chip in cemented carbide, and by applying fine tuning such as a special groove shape, ultra-high-efficiency cutting that has never been achieved before is possible.
- It is possible to obtain a good finish surface not only in high-efficiency machining but also in finishing.
- The coating has a low friction type and provides excellent chip discharge and abrasion resistance.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
Spec
- Number of blades: 4
- Blade diameter (mm): 2.5
- Blade length (mm): 10
- Total length (mm): 50
- Shank diameter (mm): 4
- Helix angle (degrees): 37 degrees to 40 degrees
- Surface treatment: UTCOAT
- Compatible Work Materials: Carbon Steel, Alloy Steel, Pre-hardened Steel, Copper, Quenched (up to 55 HRC), Cast Iron, Titanium Alloy, Super Heat Resistant Alloy
- Material/Finish: Super MG
- Country of origin: Japan
- Securities Code: 195 -3191
| Perintah No. | 64-8475-45 | |
|---|---|---|
| Model No. | CXES4025-1000 | |
| Kode JAN | 4560295110120 | |
| Harga standar |
JPY: 3,900
USD: 24.45
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Kuantitas | 1piece | |
| Saham di Jepang |
|
|
| Saham Pemasok |
|
|
Variasi produk (ukuran berbeda, spesifikasi berbeda, produk opsional, dll)
| Gambar produk | Perintah No. | Nama | Model No. | Kuantitas | Harga standar | Harga valid di Jepang | Stok [Saham Pemasok] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8475-24 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1 x Corner Radius R 0.1 x Blade Length 2.5 x Total Length 50 CXERS4010-01-025 | CXERS4010-01-025 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-25 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Blade Length 2.5 x Total Length 50 CXERS4010-02-025 | CXERS4010-02-025 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-26 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1 x Corner Radius R 0.3 x Blade Length 2.5 x Total Length 50 CXERS4010-03-025 | CXERS4010-03-025 | 1piece | JPY: 5,931 | USD: 37.18 |
|
|
 |
64-8475-27 | 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.1 x Blade Length 3.75 x Total Length 50 CXERS4015-01-0375 | CXERS4015-01-0375 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-28 | 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.2 x Blade Length 3.75 x Total Length 50 CXERS4015-02-0375 | CXERS4015-02-0375 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-29 | 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Blade Length 3.75 x Total Length 50 CXERS4015-03-0375 | CXERS4015-03-0375 | 1piece | JPY: 5,931 | USD: 37.18 |
|
|
 |
64-8475-30 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.1 x Blade Length 5 x Total Length 50 CXERS4020-01-050 | CXERS4020-01-050 | 1piece | JPY: 5,209 | USD: 32.65 |
|
|
 |
64-8475-31 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.2 x Blade Length 5 x Total Length 50 CXERS4020-02-050 | CXERS4020-02-050 | 1piece | JPY: 5,209 | USD: 32.65 |
|
|
 |
64-8475-32 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.3 x Blade Length 5 x Total Length 50 CXERS4020-03-050 | CXERS4020-03-050 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-33 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Blade Length 5 x Total Length 50 CXERS4020-05-050 | CXERS4020-05-050 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-34 | 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2.5 x Corner Radius R 0.3 x Blade Length 6.25 x Total Length 50 CXERS4025-03-0625 | CXERS4025-03-0625 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-35 | 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 2.5 x Corner Radius R 0.5 x Blade Length 6.25 x Total Length 50 CXERS4025-05-0625 | CXERS4025-05-0625 | 1piece | JPY: 5,566 | USD: 34.89 |
|
|
 |
64-8475-36 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 3 x Corner Radius R 0.2 x Blade Length 7.5 x Total Length 60 CXERS4030-02-075 | CXERS4030-02-075 | 1piece | JPY: 5,973 | USD: 37.44 |
|
|
 |
64-8475-37 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 3 x Corner Radius R 0.3 x Blade Length 7.5 x Total Length 60 CXERS4030-03-075 | CXERS4030-03-075 | 1piece | JPY: 6,379 | USD: 39.99 |
|
|
 |
64-8475-38 | 4-Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 3 x Corner Radius R 0.5 x Blade Length 7.5 x Total Length 60 CXERS4030-05-075 | CXERS4030-05-075 | 1piece | JPY: 6,379 | USD: 39.99 |
|
|
 |
64-8475-39 | 4 Flute Unequal Split Unequal Lead High-Efficiency Radius End Mill, Outer Diameter 12 x Corner Radius R 0.3 x Blade Length 30 x Total Length 100 CXERS4120-03-300 | CXERS4120-03-300 | 1piece | JPY: 16,250 | USD: 101.86 |
|
|
 |
64-8475-42 | 4-Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 1.5 x Blade Length 6 x Total Length 50 x Shank Diameter 4 CXES4015-0600 | CXES4015-0600 | 1piece | JPY: 4,180 | USD: 26.20 |
|
|
 |
64-8475-45 | 4 Flute Unequal Split Unequal Lead High-Efficiency Square End Mill, Outer Diameter 2.5 x Blade Length 10 x Total Length 50 x Shank Diameter 4 CXES4025-1000 | CXES4025-1000 | 1piece | JPY: 3,900 | USD: 24.45 |
|