Fitur

• High load-bearing rack with a wide variety of sizes and 4 types of shapes to choose from
• Shelf plate depth is 500 mm and side frame is also 500 mm, so the rack has no forward protrusion.
• * Overall depth is 544 mm.
• Height of the top plate and shelf plate can be changed at 50 mm pitch.
• Equipment fixing belt (RAC-BL1) mounting holes are attached to the top plate and shelf plate.
• Comes with a cord receptacle for storing power strips.
• Equipped with 60 mm diameter large casters and adjusters.
• A back frame that does not interfere with the wiring of the main unit is provided as standard.
• The mounting position of the back frame can be changed according to the shelf board. (The pitch of the hole is the same)
• The frame is made of square pipe with a plate thickness of 1.6 mm, and the reinforcement is made of steel plate with a plate thickness of 1.2 mm, so the strength is excellent.
• The back frame and reinforcing bar make it resistant to shaking and vibration.
• Optionally add a shelf board (ER-120HNT).
• You can optionally add a CPU shelf (ER-120CPU).
• * Although it can be installed at the bottom of the unit, the CPU shelf extends forward and cannot be fixed to the frame.
• You can optionally add a floor retainer (RAC-QL1).
• * RAC-QL1 and adjuster cannot be installed simultaneously. Remove and attach the adjuster.